DataSystems Air Suspension Controller info thread
#91
Pole Position
iTrader: (1)
Dr.Jerkyll: I'm happy with the set up. Did what I want and it can really lower and raise the car good. I didn't get the wireless module to link up with the main unit back then. But now, they work together nicely. I have the main sitting in the glove box and the wireless module in the center console. But, if you want the non wireless, it's ASR 680. But you'd still need the harness for your car, in this case, same as mine, the H-087i. You'll be happy with this system.
#92
Lead Lap
Thread Starter
Dr.Jerkyll: I'm happy with the set up. Did what I want and it can really lower and raise the car good. I didn't get the wireless module to link up with the main unit back then. But now, they work together nicely. I have the main sitting in the glove box and the wireless module in the center console. But, if you want the non wireless, it's ASR 680. But you'd still need the harness for your car, in this case, same as mine, the H-087i. You'll be happy with this system.
#94
Lead Lap
Thread Starter
Edit, I looked through my emails The harness for 2013+ LS with ASC680L wired controller is Type 3 (H-087i)
Last edited by CJITTY; 01-22-16 at 07:17 PM.
#95
Lexus Champion
iTrader: (1)
Absolutely it will. I have personally set up the presets in two 2013 LS F Sports using the ASC680L controller with harness for 2013+ models. The harness is not the same as the 2007-2009 or 2010 to 2012 models. I'll have to find the harness number, but I can say with 110% certainty that regular and super low modes work on 2013+ model LS's with the wired controller.
Edit, I looked through my emails The harness for 2013+ LS with ASC680L wired controller is Type 3 (H-087i)
Edit, I looked through my emails The harness for 2013+ LS with ASC680L wired controller is Type 3 (H-087i)
#96
Lead Lap
Thread Starter
#98
Lexus Champion
iTrader: (1)
I just read on Jimmy's Black Pearl build he used a scan tool from a Lexus technician to lower his car. Is this true? Can a Lexus tech do this or someone with the scan tool? If so I wouldn't mind dropping it an inch and using the high height button to raise it up when needed.
#99
Driver School Candidate
iTrader: (2)
Join Date: Jun 2008
Location: Arizona
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
I just read on Jimmy's Black Pearl build he used a scan tool from a Lexus technician to lower his car. Is this true? Can a Lexus tech do this or someone with the scan tool? If so I wouldn't mind dropping it an inch and using the high height button to raise it up when needed.
Regards
#102
Driver School Candidate
Join Date: Feb 2015
Location: CA
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
I messed with it this morning and eventually it started responding...and I fixed the level by making one side slightly lower than the other...but as for the passenger side just raising to semi truck height by itself I don't know what that was all about...I'm just glad it's back to operational
#104
Pole Position