16 piece led interior swap with pics
#16
You have to do your mirrors too! Looks Great when you approach and unlock it at night. Popping the mirror lights is a bit wonky - you need those plastic tools for sure. Also I had to upgrade the 'square' lights for the front done I think. I had to find 'better' LED's, the basic one's were acting up. The upgraded LED looked like a dice (super bright LED?). One other mention is I had a bad LED in the back, so every time my son turned on his light, it popped a fuse. But some quick testing found the bad LED.
#17
I picked up the seat protectors at buybuy baby but they are available on Amazon as well.
The mirror puddle lights were already done before I bought the car. That's kind of what triggered me to start really looking into doing the rest of the lights on this car. I never bothered with it on my other 3 previous Lexus'.
The mirrors, license plate, and reverse bulbs were all bright leds already ^_^
The mirror puddle lights were already done before I bought the car. That's kind of what triggered me to start really looking into doing the rest of the lights on this car. I never bothered with it on my other 3 previous Lexus'.
The mirrors, license plate, and reverse bulbs were all bright leds already ^_^
#23
#26
I received mine days after ordering it when this was first posted. Def more than 16 pieces.
Even with my panel removal kit, I can't seem to take off light covers without putting nicks on some panels. I stopped after seeing the nicks.
Maybe I'll need a smaller set of panel removal tools for this job.
Even with my panel removal kit, I can't seem to take off light covers without putting nicks on some panels. I stopped after seeing the nicks.
Maybe I'll need a smaller set of panel removal tools for this job.
#27
^^^^ yeah prob need a thinner piece. Mine had several and I used the thinnest. If you have a thin butter knife and handkerchief you could make it work but def have to be careful. Super thin flat head screwdriver and also make sure you are prying in the right spots right where the plastic clips into place.
Thread
Thread Starter
Forum
Replies
Last Post
5gears-IS
RX - 3rd Gen (2010-2015)
9
11-21-16 12:27 PM