denIS200

iTrader: (4)

Hi all,
I have a problem with the oxygen sensor bank 1 sensor 1. The connector ripped away from the electric harness of the LS.
Could you please help me to rewire the sensor from the right ecu module?

I have bought the oem sensor (89465-50120), the housing connector (90980-10869) and the terminal repair (82998-12440).

Thanks for your help.

Denis.

Hei

You got it fixed? Any idea of the colors from the vehicle side to the sensor?

I have vehicle side:
Blue-and-White
Blue
Black
Black

Sensor side:
Blue
White
Black
Black

Connecting them as:
Blue-and-white to white
Blue to blue
Black to black
Black to black

Don't seem to work.

rkw77080

It would be very helpful if you can post some pictures. Going with information given, here are some pages from the repair manual...
For Bank 1 Sensor 1, the wire colors should be:
1 = light blue with yellow stripe
2 = Black
3 = Black
4 = Brown

The terminal numbers on the connector are as follow:


Hope this information is helpful.