06Ultra

In case anybody was wondering how the f sport wheels look. Here you go. Added spacers= front10mm / rear 25mm and f sport center caps.

sr20mofo

iTrader: (10)

wow that looks awesome

are they 18s or 19s?

Brownman88

did you have to run the spacers to clear brakes?

esfourteen

****in awesome. I was just wondering how these looked. I searched everywhere and couldn't find anything. Thanks for posting this.

I'm in Jersey and have an LS also. Looking at something oem was thinking these ISF or LFA reps. but I don't really want to buy reps

daGOAT

Damn that looks good...same question as above...did u need the spacers to clear the brakes or was it just for aesthetics?

MikeFoxx

iTrader: (8)

Wow that looks great

bmore430

Best oem option I've seen yet. Very nice. I wonder how easy they are to find used. I can imagine buying these new from dealer would be a fortune. I'd love to see these on a stock suspension or slight drop for reference.

jadu

iTrader: (42)

looks real good. any more pics? it must have been really sunk that low w/o spacers

06Ultra

The rims fit without any problems and the caliper has about 3mm clearance between front rims. So spacers are not needed. But I did put a 10mm spacer on the rears only because the rear wheels sat in more then the front's (for an even look). IMO, These rims just look and feel right for an ls430. Thanks for the comments.

06Ultra

Another pic in ride height look.

MikeFoxx

iTrader: (8)

Yeah.... we r gonna need about 5 more shots cause it looks that good... it just flows

UGKkllr

I notice that the chrome trim that goes around the car is now black. I like that look a lot. Did you plasti dip it or paint it ? What exactly did you use ? details please

06Ultra

I used vinyl wrap from oracal premium gloss black. Before I purchased this wrap I had ordered a few samples of black from a bunch of other brands but I found this color/brand to be the best match.

UGKkllr

Very interesting . How long did it take you to apply it and how much prep work was involved ? My trim is peeling very bad and I have been trying to come up with an affordable alternative to spending 500 bux for all new trim.

06Ultra

Get a roll of vinyl 24"x60" cut strips of 1"x60". Get a heat gun or hair dyer plus hobby/ xacto knife. Clean all trims with dawn dish washing soap. Strip the trims down to a smooth surface if already damaged (like you had stated). Then just go out there, on a sunny day with patients and 2hrs later, done!