Swagga82

* Bolt Pattern -- 5 x 112mm

will this work for the ls 430

GATO

iTrader: (1)

yes you should be fine with a special lug nut.....I forgot what their called....but Ill check...


our LS is 114.3 but some run 112 and work


what wheel you looking at?

Swagga82

another question the guy that is trying to sell me the wheels told me i can get the bolt pattern to be re-drilled to match the ls 430 bolt pattern just in case it don't fit is it worth it or can it be doe ...i see some rim companies do it....??? i wont those wheels

Swagga82

also thank you for your help...the wheels came off a 5series bmw

GATO

iTrader: (1)

not a recommended move.....dont redrill

they will work.

what wheels are they?

Swagga82

they are called menzari sport wheels the closet to its look but the guy told me they a ADRs

well i dont want to buy the wheels if there going to be worth it

Dreadroom

I'm in France and there's 2 bolts missing that holds the underside of a plate under the engine at the front of the car,If I go to a Toyota dealer would they help in replacing these's bolts! as when I return back to the UK soon on the French motorway at speed the plate will flap about like crazy about at speed.
Any information would be most grateful.

randal

Deadroom, if you mean the under engine plastic cover, I think those bolts are 10 mm. You do not need to go to a dealer for them unless you really want to. A Toyota dealer should be able to help but you could also do it yourself. If you remove just one, you could take it to a local hardware or auto parts store and get several spares. It is not a critical bolt. Just get the same size and threading.

If you want to keep the cover from flapping about in the meantime, you could 'steal' a bolt from another, non-critical area of the cover and install it in the more critical front position. Just a stop gap measure until you can obtain more bolts.

N2LEX2L

iTrader: (2)

Wobble bolts, but they will not work for this application.