Exhaust Tips?
i think they're magnaflow tips.
11-30-08, 03:56 PM
#5
Dances with goats
i got the magnaflow mufflers with some no name company 
when i had the mufflers installed the guy had these sitting around his shop and they looked tight so i grabbed them!!
when i had the mufflers installed the guy had these sitting around his shop and they looked tight so i grabbed them!!
11-30-08, 03:57 PM
#6
Moderator
I use and would like to reccomend the Flowmaster double walled rolled edge angle cut #15365, BTW i like Blacksc400 tips too. 
Here are some close ups of the tips.....
Here are some close ups of the tips.....
Last edited by Tee; 11-30-08 at 04:03 PM.
Trending Topics
11-30-08, 04:06 PM
#8
Moderator
11-30-08, 04:52 PM
#9
Rookie
Thread Starter
Join Date: Aug 2008
Location: NC
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
Those all look fantastic everybody. Even more reason to get some now.
Tee, those should be perfectly fine for my 03 even though I don't have the cutouts in the fender correct? Just want to be sure before I buy some
Tee, those should be perfectly fine for my 03 even though I don't have the cutouts in the fender correct? Just want to be sure before I buy some
12-01-08, 04:54 PM
#11
Rookie
Thread Starter
Join Date: Aug 2008
Location: NC
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
Not a bad idea but I'm not really looking to go that extravagant...
Ok so Tee, was there any work that needed to be done before you put the tips on? They were the right size and all? And they are just clamp ons correct? Sorry for all the questions.
Ok so Tee, was there any work that needed to be done before you put the tips on? They were the right size and all? And they are just clamp ons correct? Sorry for all the questions.
12-01-08, 06:01 PM
#12
Moderator
NP, they are bolt on, but the tech said they were too big and he ended up welding them instead. No biggie for me due to the fact, i felt better knowing they won't fall off. Also IMO the stock tips are too small for my taste, and will stay in the garage for good.
Far as you not having the cut outs, I forgot 01-03 do not have those and can't say if how they will look or fit. I'm thinking they will be angle down more toward the ground base on the how the exhaust pipes look.
12-01-08, 06:34 PM
#13
Driver School Candidate
Join Date: Jul 2006
Location: La
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
I have an '02 and my pipes curved down but did have a slight cutout in the bumper underneath. I was just like you and didn't want to be too flashy so I went to the dealer and picked up a stock pair oval shaped that slip on.
I went to a muffler shop to have part of the angle cut off of my tailpipe and wanted them welded on. He charged me $25 bucks and they gave me the exact look that I wanted. I'll try to post a picture tomorrow.
I went to a muffler shop to have part of the angle cut off of my tailpipe and wanted them welded on. He charged me $25 bucks and they gave me the exact look that I wanted. I'll try to post a picture tomorrow.
