LS - 1st and 2nd Gen (1990-2000) Discussion topics related to the 1990 - 2000 Lexus LS400

1994 LS.......Wheel issue.....help!?

Thread Tools
 
Search this Thread
 
Old 07-27-16, 09:57 PM
  #16  
OMAHA
Pole Position
Thread Starter
 
OMAHA's Avatar
 
Join Date: Jan 2014
Location: Nebraska
Posts: 348
Received 4 Likes on 4 Posts
Default

Originally Posted by LexusAl
I came across a beautiful beige metallic '95 LS400 Tuesday,7-27-16 in Macon,GA.I am interested in buying it,but the owner says the rear axle has a problem with a bracket holding it in place.The left rear wheel does some slight jerking motion when put in gear to drive.But after slowly taking off,it does ok but you have to be careful with the gas.Overall,after close inspection the car looks pretty decent.A slight tear in the driver seat leather but the other seats are not bad.It has about 267K miles on it but it ran good and has good brakes.I took it for a short test drive and it wasn't bad.
I'm wondering about what the repair cost will be to get another bracket/bushing to hold the rear axle in place if that's what's wrong.I'm going to try and get the car for around $1,200 to $1,400.But,I'm thinking it could be a costly repair for the rear end.Also,the driver window regulator will need repair.And the A/C may need servicing.The paint job is beautiful.It has been repainted so it may have been in a wreck.If so,I will not offer the stated amount but even less.
I'll call the dealership and get a history report on it after I get the VIN.Does anyone think this is a worth while endeavor?The guy was asking a minimum of $1,800,but there is no way I'll give that much for it.I think the best thing to do is have my mechanic inspect the rear end.The mechanic I use is very trustworthy and is one of the best around.Would anyone like to reply?Thanks
$500 tops.....but I would pass....vehicle history report should help...
Old 07-28-16, 09:35 AM
  #17  
wnyjazz
Intermediate
 
wnyjazz's Avatar
 
Join Date: Dec 2008
Location: New York
Posts: 370
Received 8 Likes on 8 Posts
Default

Originally Posted by OMAHA
can u post a pic?
Of what? I didn't buy wheels yet.
Old 07-28-16, 09:58 AM
  #18  
LexusAl
Driver School Candidate
 
LexusAl's Avatar
 
Join Date: Aug 2013
Location: Ga.
Posts: 35
Likes: 0
Received 1 Like on 1 Post
Default

Thanks for the reply Omaha.I'll get the VIN and go from there.I agree that $500 should be the max.It is driveable but for how far?The seller mentioned a bracket.But the only thing I see as far as a bracket is concerned is for the sway bar at the rear end.With a bushing for the bracket.I'll do a little more digging and post my findings.Thanks
Old 07-27-17, 02:53 PM
  #19  
OMAHA
Pole Position
Thread Starter
 
OMAHA's Avatar
 
Join Date: Jan 2014
Location: Nebraska
Posts: 348
Received 4 Likes on 4 Posts
Default Replacing my factory wheels with....factory wheels!

Originally Posted by OMAHA
I want to replace my factory wheels. The "wheel guy" at Wal Mart said my car would be better off with 18" wheels......he said my model did not fit 16" aftermarket wheels because of the calipers etc. etc.....has anyone heard of this problem before? I really wanna replace my wheels but dont wanna sacrifice PERFORMANCE!
ok i just ordered 4 factory wheels for $499....performance wise i think this is the best decision....and i like the "original" look
Old 10-18-18, 10:20 AM
  #20  
OMAHA
Pole Position
Thread Starter
 
OMAHA's Avatar
 
Join Date: Jan 2014
Location: Nebraska
Posts: 348
Received 4 Likes on 4 Posts
Default Alloy!😫

I know this is a old thread but I sent the alloys back because chrome ones look much better on my car..... hated the alloy look!
Old 10-18-18, 07:55 PM
  #21  
RA40
Super Moderator

iTrader: (6)
 
RA40's Avatar
 
Join Date: May 2003
Location: California
Posts: 20,850
Received 463 Likes on 361 Posts
Default

Any pictures?
Old 10-24-18, 09:36 AM
  #22  
OMAHA
Pole Position
Thread Starter
 
OMAHA's Avatar
 
Join Date: Jan 2014
Location: Nebraska
Posts: 348
Received 4 Likes on 4 Posts
Default

Originally Posted by RA40
Any pictures?
I think the original chrome wheels are best.....not satisfied with this look. The specifications on these are:16x7, offset 45mm, 20 lbs.

Spent $500 at tire rack......😂😂🤣

Last edited by OMAHA; 10-24-18 at 09:46 AM.
Old 10-24-18, 09:45 AM
  #23  
OMAHA
Pole Position
Thread Starter
 
OMAHA's Avatar
 
Join Date: Jan 2014
Location: Nebraska
Posts: 348
Received 4 Likes on 4 Posts
Default 😢


Old 10-24-18, 04:57 PM
  #24  
OMAHA
Pole Position
Thread Starter
 
OMAHA's Avatar
 
Join Date: Jan 2014
Location: Nebraska
Posts: 348
Received 4 Likes on 4 Posts
Default


Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
PureCrstal
IS - 2nd Gen (2006-2013)
3
12-27-23 06:17 AM
olddog
GS - 1st Gen (1993-1997)
1
11-29-05 09:37 PM
Macc
LS - 1st and 2nd Gen (1990-2000)
13
06-28-05 06:03 PM
dingo
SC430 - 2nd Gen (2001-2010)
4
10-20-03 12:15 PM



Quick Reply: 1994 LS.......Wheel issue.....help!?



All times are GMT -7. The time now is 10:42 AM.