96 ls 400 how to remove front portion of center console
#1
Driver School Candidate
Thread Starter
Join Date: Jul 2015
Location: NV
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
96 ls 400 how to remove front portion of center console
folks, what do i need to remove in order to free up the front portion of the center console (where the silver pointer is aimed). i already have the rear portion with the storage box and rear ac separated. thanks
#2
Driver School Candidate
Thread Starter
Join Date: Jul 2015
Location: NV
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
got it out.
1. remove panel around ignition switch (pops out)
2. remove panel underneath steering wheel (with the trunk release and gas release).. there's a screw hidden behind the e-brake.
3. remove the black bottom portion beneath the glove box on pass side (pops right out)
4. remove 3 screws on top of glove box and the small connector over in the passenger's left knee area and let the glove box just hang (without putting strain on any wiring)
5. pull the center console out (it separates from two slots.. it's not bolted or riveted in)
this is just to remove the front portion.. i'll be doing a youtube video on the whole thing, give me a week to upload and edit it
1. remove panel around ignition switch (pops out)
2. remove panel underneath steering wheel (with the trunk release and gas release).. there's a screw hidden behind the e-brake.
3. remove the black bottom portion beneath the glove box on pass side (pops right out)
4. remove 3 screws on top of glove box and the small connector over in the passenger's left knee area and let the glove box just hang (without putting strain on any wiring)
5. pull the center console out (it separates from two slots.. it's not bolted or riveted in)
this is just to remove the front portion.. i'll be doing a youtube video on the whole thing, give me a week to upload and edit it
Last edited by AuctionGuy; 07-21-15 at 10:48 PM.
Thread
Thread Starter
Forum
Replies
Last Post