LS - 1st and 2nd Gen (1990-2000) Discussion topics related to the 1990 - 2000 Lexus LS400

wiring harness in the right wheel well..

Thread Tools
 
Search this Thread
 
Old 10-11-13, 03:28 PM
  #1  
OKSTANCE
Lead Lap
Thread Starter
 
OKSTANCE's Avatar
 
Join Date: Apr 2011
Location: OK
Posts: 702
Likes: 0
Received 2 Likes on 2 Posts
Exclamation wiring harness in the right wheel well..

what all does that control other than the ABS?

my wheel almost flew off on the highway today..luckily my car is so low the wheel had nowhere to go.
but the whole weight of the car was put onto the wheel and ate through my splashguard.
SO now i have exposed wires and my starter isnt even clicking and the headlights arent turning on.

any list of possible thing that could have been affected would be great.
im going to work on checking all the fuses tomorrow.

thanks in advance as i could not find much while searching this issue...

Last edited by OKSTANCE; 10-11-13 at 03:59 PM.
Old 10-11-13, 05:18 PM
  #2  
PureDrifter
BahHumBug

iTrader: (10)
 
PureDrifter's Avatar
 
Join Date: Aug 2004
Location: California
Posts: 23,918
Received 94 Likes on 86 Posts
Default

fix ALL the wiring, then repalce fuses and start figuring out what you blew up.
Old 10-14-13, 06:13 AM
  #3  
OKSTANCE
Lead Lap
Thread Starter
 
OKSTANCE's Avatar
 
Join Date: Apr 2011
Location: OK
Posts: 702
Likes: 0
Received 2 Likes on 2 Posts
Default

THANK GOD - i didnt have to find out what all those wires control.
some of the harness was worn through and kinda melted together but
all the wires were still connected and in decent shape so i wrapped everything back up
and everything seems to be working normally...so a word to the lowered...
hide yo harness before its too late
Old 10-14-13, 10:40 AM
  #4  
timmy0tool
Moderator
iTrader: (7)
 
timmy0tool's Avatar
 
Join Date: Sep 2008
Location: 714/949, SoCal
Posts: 6,927
Received 415 Likes on 370 Posts
Default

or tighten all your lugnuts! was there something else that made your wheel almost fly off?
Old 10-14-13, 12:01 PM
  #5  
OKSTANCE
Lead Lap
Thread Starter
 
OKSTANCE's Avatar
 
Join Date: Apr 2011
Location: OK
Posts: 702
Likes: 0
Received 2 Likes on 2 Posts
Default

i always get them super tight..someone at work thinks someone may have tried to steal the wheel because i did notice some extra vibration before it all happened but i was on the highway on my way to work..thankfully everything was simple to fix
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
LTSC
LS - 1st and 2nd Gen (1990-2000)
0
03-27-19 09:22 PM
FGeric
RX - 2nd Gen (2004-2009)
1
01-01-19 04:22 PM
Mike1UZ
SC- 1st Gen (1992-2000)
2
08-15-18 07:28 PM
TokinSC400
Performance & Maintenance
4
04-26-17 08:32 AM
soarer1988
Performance & Maintenance
3
05-31-14 11:14 PM



Quick Reply: wiring harness in the right wheel well..



All times are GMT -7. The time now is 04:59 AM.