What's a lateral arm bushing - front suspension
#16
Lexus Champion
iTrader: (1)
MEYLE is german engineering parts, and should be good to great. stay out of china.
The making of MEYLE-HD parts
When developing MEYLE-HD spare parts engineers have only one goal in mind: creating automotive parts which top the original in terms of durability and service life. To achieve this goal they analyse the weak points of OE components and subsequently correct these, for example by using higher-grade materials or by a more robust part design.
The making of MEYLE-HD parts
When developing MEYLE-HD spare parts engineers have only one goal in mind: creating automotive parts which top the original in terms of durability and service life. To achieve this goal they analyse the weak points of OE components and subsequently correct these, for example by using higher-grade materials or by a more robust part design.
#17
Lexus Test Driver
iTrader: (3)
We used a lot of them in high end german cars at my old shop. good stuff, and well priced although, iirc, were lighter duty than OEM in most cases.
I'd really like to get my hands on a set of the Moogs, B/A's, Meyle's and Lexus arms and mic and measure them all up and see which one is better and/or most accurate replacement for stock!
I'd really like to get my hands on a set of the Moogs, B/A's, Meyle's and Lexus arms and mic and measure them all up and see which one is better and/or most accurate replacement for stock!
#18
Lexus Champion
just because it is a German brand, doesn't mean it is made in Germany!
ever notice how fancy brands will get a good reputation, and then ***** out their good name to all kinds of Chinese crap? - yes Sony, Bose, GE, Philips, Lexmark, and a 1000 others, I am talking to YOU!
ever notice how fancy brands will get a good reputation, and then ***** out their good name to all kinds of Chinese crap? - yes Sony, Bose, GE, Philips, Lexmark, and a 1000 others, I am talking to YOU!
Last edited by PureDrifter; 12-14-12 at 08:53 PM.
#21
I did the Moog outer tie rod ends myself 8months ago and the passenger side failed already so I had to replace it. Pep Boys actually dropped them as a supplier for outter tie rod ends due to thier high failure rate (I was told). They're telling me the same thing though ( that I have a bad "lateral arm bushing") on the passenger side. I'm having them do my lower ball joint on the driver side because I've heard it clunking and creaking over there and we all know better safe than sorry ( with a freaking wheel breaking off!!) when those fail...
Thread
Thread Starter
Forum
Replies
Last Post
OldLs400
LS - 1st and 2nd Gen (1990-2000)
3
08-19-18 02:19 PM
9000revs
LS - 1st and 2nd Gen (1990-2000)
5
02-02-15 06:43 PM