RA010623

iTrader: (1)

any particular one you would recommend?

Dirtybrd

I wanna see if anyone has done it and how it came out, is that so hard to understand?

RA010623

iTrader: (1)

here few examples googleing

RA010623

iTrader: (1)

magnaflow

RA010623

iTrader: (1)

found a setup i really like
i'm thinking of running dual exhaust tip like this but maybe a little smaller and with slant cut tip.
maybe something like this
http://www.ebay.com/itm/STAINLESS-DU...06fbc1&vxp=mtr

RA010623

iTrader: (1)

anyone have dual magnaflow 10428 exhaust
http://www.magnaflow.com/02product/s...=main&id=10428

MrFuel

iTrader: (3)

Here is a picture of my LS400. Junction Produce exhaust

ls400916

Looking towards dual tips now. Those fabulous set look clean. Scraped holes in my stock ucf20 exhaust on the way back from the BOS meet. Took it to a local muffler shop. Cut off my flanges after the cat, deleted the resonator and mid muffler, added an x-pipe and 2.25" piping all the way down. Still have the stock rear mufflers though. Looking for the right look. Amazing clearance with what's been done though.

RA010623

iTrader: (1)

i'm still deciding if i should keep the stock Y pipe and cut off the exhaust after the stock Y and just replace the 2nd muffer and axle back with magnaflow 10428
i want the keep my exhaust relatively quiet it's a luxury car after all

ls400916

Doesn't sound like a bad idea. Actually looks good. Were you keeping the resonator? just curious. You would have to find some sleek mufflers for the mid muffler set-up though. I removed the cat flange, resonator and the mid mufflers just so the shop could tuck everything above frame level.I was scraping my mid mufflers like crazy before.

ls400916

MrFuel.. where'd you pick up those rear taillight eyelids? Lookin clean. I've seen your car at driven authority before

MrFuel

iTrader: (3)

Ya, I work there. The eyelids are made by junction produce. Got them from a friend that gets me all my parts from Japan.

PureDrifter

iTrader: (10)

look at the exhaust layout thread in the FAQ for questions on how best to lay out your new setup.

i'm a fan of quads. I've had another set to replace the DTM-style tips ive had on the car the past 5 years but havent had the chance to go to the exhaust shop

RA010623

iTrader: (1)

here is the repost of the exhaust diagram i found in the faq

RA010623

iTrader: (1)

i wanted to keep resonator cuz i want a quiet exhaust system .

i think if you want to replace the center exhaust maybe you can replace with a resonator or CAT or maybe something like this http://www.magnaflow.com/02product/s...=main&id=10134 which you should be able to tuck it pretty tight against the body to avoid rubbing.