Help! upgraded to nav now no antenna raise
#1
Driver School Candidate
Thread Starter
Join Date: Sep 2011
Location: indiana
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Help! upgraded to nav now no antenna raise
Help!!
Upgraded head unit to Pioneer X930BT this weekend and everything is working great except now the anttenna will not raise when unit is powered??? Anyone run across this issue?
Upgraded head unit to Pioneer X930BT this weekend and everything is working great except now the anttenna will not raise when unit is powered??? Anyone run across this issue?
#2
It has got to be a simple power on/off switch that is separate from the antenna. You have your antenna wire (for signal) plugged into the radio but there has to be a separate power wire that runs to the motor that raises and lowers the antenna. The previous radio had some type of integration that powered the antenna motor when you turned the radio on. I'll bet if you trace it back you will find it's not connected.
#5
I think its not hook up cause when the factory radio is on the antenna is up when its off its down, but you can have a tape in the deck and it going to be down. The antenna is a wire that look like one of them red, white, or yellow wires that go on the back off a DVD player see if its hook up
#6
Thread
Thread Starter
Forum
Replies
Last Post
Oldsports
RX - 2nd Gen (2004-2009)
9
10-05-18 05:18 AM