exploded views body panels?
#1
Rookie
Thread Starter
Join Date: Oct 2011
Location: MI
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
exploded views body panels?
Well, it finally happened. One of the kids backed their car into my LS this morning, in a hurry, did not check behind before backing up. Took out the right headlight and signal assemblies, bent the hood, bent or broke a couple of small brackets under the light assy.
Anywhere to find exploded views of how this area is assembled? I can't tell what is broken without removing everything, once it comes apart, I am not sure it will go back together anytime soon.
I did check out the EBSCO APRC links using the tech/tech credentials and found lots of engine, electrical and chassis repair info but no body panel info
What other damage should I look for? It looks as though the right side bumper shock absorber was exercised, I see marks indicating rearward movement on the bumper cover
Time to start accumulating parts I guess
Looking for following parts for a UCF21 (98-00 LS400)
Hood in Atlantis Blue Mica
Right side headlamp assy NON-HID
Right side turn signal assy
Thanks for any suggestions or info
Anywhere to find exploded views of how this area is assembled? I can't tell what is broken without removing everything, once it comes apart, I am not sure it will go back together anytime soon.
I did check out the EBSCO APRC links using the tech/tech credentials and found lots of engine, electrical and chassis repair info but no body panel info
What other damage should I look for? It looks as though the right side bumper shock absorber was exercised, I see marks indicating rearward movement on the bumper cover
Time to start accumulating parts I guess
Looking for following parts for a UCF21 (98-00 LS400)
Hood in Atlantis Blue Mica
Right side headlamp assy NON-HID
Right side turn signal assy
Thanks for any suggestions or info
#2
Driver School Candidate
Join Date: Oct 2011
Location: GA
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
#3
Rookie
Thread Starter
Join Date: Oct 2011
Location: MI
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Cool thanks!. Just what I was looking for, that's a huge help.
Looks like I need the 52029 reinforcement assy and the right side 52123B reinforcement plate. These pieces will let me get the headlight mount points back where they belong.
Looks like I need the 52029 reinforcement assy and the right side 52123B reinforcement plate. These pieces will let me get the headlight mount points back where they belong.
#6
Driver School Candidate
Join Date: Sep 2011
Location: SC
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post