question regarding Megan EZ Coilovers
08-03-11, 09:31 AM
#1
Driver
Thread Starter
Join Date: Apr 2008
Location: WA
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
question regarding Megan EZ Coilovers
I have them installed on my 98. How high can i raise the car without posing any danger? I mean how much thread should there be left so that the coilover doesnt break apart?
08-03-11, 10:38 AM
#2
Driver School Candidate
Join Date: Jun 2011
Location: az
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Per the instructions:
Caution-Ride Height Adjustment
"When adjusting the ride height, screw the shock into the lower arm mounting for at least 30mm deep to prevent the shock come off the lower arm mounting of A arm strut, and 80mm of McPherson strut"
On mine for a 95' there are sight holes on the front coilovers that is at 30mm. hope this helps!
Caution-Ride Height Adjustment
"When adjusting the ride height, screw the shock into the lower arm mounting for at least 30mm deep to prevent the shock come off the lower arm mounting of A arm strut, and 80mm of McPherson strut"
On mine for a 95' there are sight holes on the front coilovers that is at 30mm. hope this helps!
Thread
Thread Starter
Forum
Replies
Last Post
woodt3
LS460 / 430 / 400 / 600h Classifieds
1
12-12-11 06:06 PM
