ctwigg1985

I upgraded my audio system with an aftermarket head unit. With this install, I had to bypass the stock amp and sub. I wanted the amp back so I re installed the stock wiring harness. All wires are matching in color and have a solid connection, but I have no sound on the right side of the car. The harness I used is from a 1992 LS400. Can someone please give me some advice or advise me where I can find photos of the stock harness, positions and colors of wires. Thank you

PureDrifter

iTrader: (10)

you wired it wrong, go back and do it again.

specifically check the wires from the CD changer vs. the speaker wires as they have similar colors

Kansas

Click on "Proceed to ..." at the bottom of this web page for sound system wiring diagrams: http://www.senecac.on.ca/library/res...bsco_arrc.html

ctwigg1985

Thank you Kansas. This site is what I was looking for.