LS400JDM2

Dear all experts,

my driver side window had this thing where if i had the door open it will not work and when i push on the door harness wires it will work again. and now it totally stopped working .. right side front window and right side rear still roll up and down if you used the window switch on that door but the driver side front and rear totally stop working.
I am thinking it can be the wires getting messed up where it connects from door to car .? Any questions or threads on this problem please help?
What should I check ?

Thermactor

iTrader: (1)

bust out the multimeter and start hunting for volts lol

renatodato

Most likely it's the switch or a bad connection to the switch. I'd investigate there first.

LS400JDM2

hello what are the procedures to diagnose this . Should I check the fuses first then if not that then where do i start thank you

LS400JDM2

it was the wires in the door harness between door and body fixed it and wroking good now!