trez_doz

i'm planning on doing my fogs on my 1993 LS so i can turn them on independently. i know which wires to splice and connect and everything but i dont know where it's located at. any link for this specific mod or pix i will greatly appreciate = ) thanks in advance! = )

VIP_Rob

you could always run it through an inline fuse and relay to a switch. just connect the inline fuse to the battery or 12v source and of course a ground. then the relay to the switch and part of the light. do this for each light. I think autozone and advanced carry foglight kits for like 7-12 bucks ... im not sure on where they are on the ls but hope this helps

trez_doz

so what do i run through a fuse? i just want to use the factory wiring and just add wires to it so i can independently turn it on

VIP_Rob

ya you use your factory wiring and splice it into a relay and from the relay to the inline fuse and also to the switch the switch then to ground ill see if i can draw up a diagram for you.

VIP_Rob

heres one I just found

trez_doz

so im definitely going to have to get me a fuseholder and a relay? what specific wire am i gonna tap in to? cause i know what to tap in the factory relay. thanks for the help!

Li Ls4

iTrader: (12)

you dont really have to get a fuse holder and a relay. BUT to be safe u should wire up a fuse to the power wire just in case to prevent anything from burning up or catching on fire.

the relay is also a choise also. if ur worried about forgeting to turn ur fogs off than u should get a relay also.

i wired my fogs up pritty similar to the diagram but i didnt put a relay in. so whether the key is in the ignition or not i my fogs will stay on. im going to put a relay caz sometimes ill b running late to class and 4get to turn em off haha

VIP_Rob

ya thats how I wired them on my old prelude its not hard just depends on when you want them on and with what switch

trez_doz

but what specific wire should i tap into?

Li Ls4

iTrader: (12)

i cut the conector off that you plug the bulb wires to. its a power and a ground wire. then i ran my own wires to the battery. from the battery to the switch i put inside the car. i didnt tap into any wires the way i did it

VIP_Rob

neither did I, other than the positive wire running from the bulb connector

trukn1

https://www.clublexus.com/forums/ls4...for-ucf10.html

Fuse for the fog lights for UCF10/11 is located in the fuse box under the steering column.

trez_doz

so you dont have to do anything with the factory relay or the fuses? im really confused :[ can anyone do this step by step in detail?