Unboxed, pic----->
Trending Topics
#8
Driver
Thread Starter
Join Date: May 2003
Location: California
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
ok, here are some labor rates at a local shop, lemme know what you think:
Thank you for contacting Auto House of Clovis, Inc for you service and repair needs.
With you supplying all parts and fluids needed, the below listed dollar amounts are for labor only. Also, please note Auto House of Clovis, Inc. offers no warranty on customer supplied parts or components, or damage that maybe caused by a customer supplied part if a failure occurs. We would be happy to perform these services for you.
Labor Only
Oil Change - $20.00 (labor) + $4.00 (hazardous waste fee)
V-belt replacement - $40.00
Transmission mount replacement - $80.00
Prices are based on completing listed job tasks at same visit.
Thank you once again for contacting Auto House of Clovis, Inc.. We look forward to assisting you with your repair needs.
Darrly Lowitz
Owner
Thank you for contacting Auto House of Clovis, Inc for you service and repair needs.
With you supplying all parts and fluids needed, the below listed dollar amounts are for labor only. Also, please note Auto House of Clovis, Inc. offers no warranty on customer supplied parts or components, or damage that maybe caused by a customer supplied part if a failure occurs. We would be happy to perform these services for you.
Labor Only
Oil Change - $20.00 (labor) + $4.00 (hazardous waste fee)
V-belt replacement - $40.00
Transmission mount replacement - $80.00
Prices are based on completing listed job tasks at same visit.
Thank you once again for contacting Auto House of Clovis, Inc.. We look forward to assisting you with your repair needs.
Darrly Lowitz
Owner
#9
Lexus Test Driver
iTrader: (1)
How to change the serp belt:
Take off the air duct over the radiator. 1 10mm bolt.
Take a 14mm socket and put it on the tensioner. And turn. Old belt comes loose.
Slide the old belt off.
Put the new belt on, using the socket to slide the belt over the tensioner.
Five minutes.
How to replace the trans mount:
Get under the car
Put a jack under the rear of the trans
Remove the four nuts in the middle of the trans crossbracket
remove the trans crossbracket bolts - four of them at 14mm ea
Remove the four 12mm bolts holding the mount to the trans
Put the new mount on with the 12mm bolts
Put the trans cross-bracket under the mount
Put on the 4 12mm nuts and the 14mm bolts
done, 5 minutes.
Take off the air duct over the radiator. 1 10mm bolt.
Take a 14mm socket and put it on the tensioner. And turn. Old belt comes loose.
Slide the old belt off.
Put the new belt on, using the socket to slide the belt over the tensioner.
Five minutes.
How to replace the trans mount:
Get under the car
Put a jack under the rear of the trans
Remove the four nuts in the middle of the trans crossbracket
remove the trans crossbracket bolts - four of them at 14mm ea
Remove the four 12mm bolts holding the mount to the trans
Put the new mount on with the 12mm bolts
Put the trans cross-bracket under the mount
Put on the 4 12mm nuts and the 14mm bolts
done, 5 minutes.
Thread
Thread Starter
Forum
Replies
Last Post
tahiles
LS - 3rd Gen (2001-2006)
9
12-23-13 04:05 PM