LS - 1st and 2nd Gen (1990-2000) Discussion topics related to the 1990 - 2000 Lexus LS400

A few problems- steering, memory and lights

Thread Tools
 
Search this Thread
 
Old 12-25-13, 06:03 PM
  #1  
ls400rainy
Driver School Candidate
Thread Starter
 
ls400rainy's Avatar
 
Join Date: Dec 2013
Location: tx
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default A few problems- steering, memory and lights

Hi

I bought a 1992 LS400 a few months ago and it is a pleasure to drive. The car has 172k miles on the clock.

Hope you guys can help me with some niggles I have, I have tried searching the forums but they do not specifically answer my questions-

1. The power steering column is dead. It never worked, it does not go up or down/ no tilt or telescope. The motor does not sound at all, its as if it is completely dead. Could this be a motor issue, an ignition switch issue or something else?

2. The memory does not save any settings at all. Could it be possible that there is a loose/broken connection somewhere?

3. The lights on the dash aircon controls are partially lit. Is this a case of blown bulbs?


I will appreciate any feedback on the above and if someone can briefly explain me what do do. I am an amateur mechanic/hobbyist so can easily attempt any reasonable repairs on my own with a bit of guidance.

Thanks
Old 12-25-13, 07:22 PM
  #2  
LScowboyLS
Lexus Champion
 
LScowboyLS's Avatar
 
Join Date: Dec 2011
Location: Birmingham, AL
Posts: 4,078
Likes: 0
Received 81 Likes on 39 Posts
Default

1. The power steering column is dead. It never worked, it does not go up or down/ no tilt or telescope. The motor does not sound at all, its as if it is completely dead. Could this be a motor issue, an ignition switch issue or something else?
first, check the fuse

2. The memory does not save any settings at all. Could it be possible that there is a loose/broken connection somewhere?
memory for what precisely?

3. The lights on the dash aircon controls are partially lit. Is this a case of blown bulbs?
you need this $30 part and someone who has experience soldering small meticulous things! (45 tiny connections to solder)
Old 12-25-13, 08:32 PM
  #3  
dc893
Lead Lap
 
dc893's Avatar
 
Join Date: Aug 2012
Location: FL :(
Posts: 693
Likes: 0
Received 0 Likes on 0 Posts
Default

If it is the control buttons then it is just a matter of taking it apart and putting new bulbs in.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mike246
GS - 2nd Gen (1998-2005)
1
10-09-18 08:19 PM
Ozzieblast
GS - 3rd Gen (2006-2011)
1
07-28-17 06:39 PM
ronP
LS - 3rd Gen (2001-2006)
0
11-09-15 10:22 AM
yusych
LS - 1st and 2nd Gen (1990-2000)
12
11-14-09 08:21 PM
hksnlper
LS - 1st and 2nd Gen (1990-2000)
6
09-19-07 01:04 PM



Quick Reply: A few problems- steering, memory and lights



All times are GMT -7. The time now is 01:05 AM.