When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Thanks! No bodywork or rubbing issues? Stock suspension!
No rubbing or fender work. It's on Stance coilovers. 1 finger gap in the front and tucking the tire in the back. Only scrap on high speed bump so going lower in front soon.
Thanks man. They are MRR HR2's 19x8.5/9.5 35et Tires size is 225/255-35-19 5mm spacer in the front to clear our calipers.
This is what I don't get. I bought wheels +30 for the rear and +35 for the front of my 92 in those same widths and they stick out like crazy. Easy a inch past the front fenders and at least two inches in the rear. I think something is up with the wheels.
This is what I don't get. I bought wheels +30 for the rear and +35 for the front of my 92 in those same widths and they stick out like crazy. Easy a inch past the front fenders and at least two inches in the rear. I think something is up with the wheels.
I do know that the ucf10 is a slightly smaller car than my ucf20. Also before I lowered mine the fronts wheels were sticking out .5" and the rears were completely flush. Are you lowered? Slamming sunk my fronts in 1 inch and the rears easy 1.5".
It has the H&R springs on it. I'm sending these AV50's back. I'm thinking these wheels are designed for the stretched tire cambered look and that's not what I'm after. I wondered if it something to do with the size of the car.
Had to raise the front up a little bit. For some reason the front driver side kept rubbing and rubbed away some of the fender liner by the fender lip. No rub on top of fender liner so I think I'm ok but I didn't think 225/35 would rub on 19x9 +0 with a roll and pull. Lesson learned I'm replacing them with 215/35 the next time I need tires.
My early 92 with my other money pit hangin out
Haven't really done anything to the LS yet cus I've been going through and fixing stuff, doing maintenance, and getting the car road worthy... Got it running and driving for 800 so it needs stuff haha
First up is coils and wheel spacers
Basically gonna make it a clean respectable daily cus I hate how boring the current daily (05 altima) is and I miss daily-ing one of these
09-04-15, 09:38 PM
They are MRR HR2's 19x8.5/9.5 35et Tires size is 225/255-35-19 5mm spacer in the front to clear our calipers.
