When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
how much pulling did u have do to ur fenders radiokilla? I think I already messaged u on vsc but I cant remember if it was on here or there
also did u shave or roll the fronts? hoping I can fit a 19x10 up front with a mid offset
dengman - Thats too cool! I just picked up a little truck, so I'm turning the LS into a weekend/fun car. I was really considering adding a hitch at one point too.
dengman - Thats too cool! I just picked up a little truck, so I'm turning the LS into a weekend/fun car. I was really considering adding a hitch at one point too.
trailer weighed 1650lbs empty
there was a h22 honda long block and 5 lug suspension and brakes from a prelude in there With a set of GTA wheels and screen printing equipment and shelving.
Doubtful since they're metric. 10.9 or stronger would be the way to go.
yeah the hardware set to bolt the RCA to the ball joint was 8.8 grade hex bolts while the hardware set to bolt the knuckle to the RCA was 12.9 grade 10mm allen head bolts. this is how i get them from studio.
i recently installed my RCAs this weekend and upgraded the 8.8 grade hex bolts to 12.9 grade 10mm allen head bolts to match the rest of the hardware, and to also minimize the risk of any failures. i will post my experience of it all soon.
07-31-13, 01:23 PM
