Post up Recent pixs of YOUR car (LS400s)
05-07-13, 12:25 PM
#5087
dang how much work do u guys have to put into exhaust to make ur car driveable?
im not even that low on 18s and i scrape my exhaust just going over bumps on a fairly flat road
i dont think its because of my low tire pressure lol
im not even that low on 18s and i scrape my exhaust just going over bumps on a fairly flat road
i dont think its because of my low tire pressure lol
Last edited by OKSTANCE; 05-07-13 at 12:29 PM.
05-07-13, 12:56 PM
#5090
I cut off all of my exhaust after the center cat then ran 2.5" piping as far tucked up as possible to a smaller muffler which is located on the drivers side heat shield area where the OEM secondary mufflers were to an exhaust tip out the back. I'll try to find a pic.
05-07-13, 01:12 PM
#5091
I had mine redone before I dropped the car on coilovers so it wouldn't scrape. I ran 2 1/4 inch pipe from the manifolds back with glasspack style mufflers for max clearance. If you look under my car the chassis is lower than the exhaust. It took alot of time to get it right but in the end I'm super happy to not be dragging any exhaust pipe! 
05-07-13, 07:18 PM
#5094
A buddy just sent these to me. This is my car a few months back right before I had it painted. This was at a drift event at an old milk factory. We were in one of the big empty buildings. That's a friends LS460 in the background. And yes, that's me in the one picture. 
05-08-13, 07:28 AM
#5096
lol i had my whole exhaust redone/raised up and i still eat it and now that it's tucked higher, the first thing that hits is the frame. i've lost several pieces under my car such as panels and exhaust heat shields so far.. scraping frame daily, NBD.
anyways, here's an updated pic of the car:
anyways, here's an updated pic of the car:
Last edited by xtremex626; 05-08-13 at 07:35 AM.
05-09-13, 02:13 PM
#5097
Driver School Candidate
Join Date: May 2013
Location: Illinois
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Hi there,
I'm a guy from Lithuania, Europe and I'm a newbie posting here. But since I've bought my LS400 '98 about a year ago I was reading this forum a lot. Please see some pics of my LS' metamorphoses below (last pics were made today, after I've installed coil-overs).
I'm a guy from Lithuania, Europe and I'm a newbie posting here. But since I've bought my LS400 '98 about a year ago I was reading this forum a lot. Please see some pics of my LS' metamorphoses below (last pics were made today, after I've installed coil-overs).
