JPratt

damn sleepy!!!!!

PureDrifter

iTrader: (10)

make sure the preload is set right. I've seen a fair few megans come with wrongly set preload from the factory. The spring is NOT supposed to have any preload on it, the lower collars are supposed to be just snugged up enough to keep the spring from moving around and that's it.

Also, if you call Megan they'll tell you that you're allowed to droop the springs up to 1" (~24mm) without warranty issues, at least that's what they told me twice.

SuicidnS13

iTrader: (2)

LOL "too expensive...."


Anyways here are Megans not nearly even close to being dropped all the way. Still had another 1/2 of drop in the rears and atleast 3" in the fronts. Im on 20's here

http://www.flickr.com/photos/suicidns13/7998622588/http://www.flickr.com/photos/suicidns13/7998622588/ by http://www.flickr.com/people/suicidns13/, on Flickr



And here they are drooped 1/2" in the rear and on 19's. Rides great (smooth and just a little stiffer than stock) as long as your UCA clearance holes have been drilled out.

http://www.flickr.com/photos/suicidns13/8366584094/http://www.flickr.com/photos/suicidns13/8366584094/ by http://www.flickr.com/people/suicidns13/, on Flickr

http://www.flickr.com/photos/suicidns13/8365512887/http://www.flickr.com/photos/suicidns13/8365512887/ by http://www.flickr.com/people/suicidns13/, on Flickr

j2b4o

Thanks PD, I read the preload FAQ on the Megan site before the coilovers even arrived(lol). It's just snugg enough to hold the spring snugg but not so snugg it won't rotate with the shock fully extended(easier height adjustment IMO). On the site it says any droop voids the warrantee. Good to know they allow droop. I just have to measure shock travel at ride height now, so I can see how much I would have left after the droop. VA roads blow BIgTIMe! It's like driving on the moon with full gravity. I also have them set full soft for my pregnant wife so I can't go supper low right now anyway.

GreenUCF20

It's actually a custom plate made by a local shop called Boomer's in Boston,Ma. They didn't have a kit in & the installer just created this one by hand. The DVD player is crisp & clear!

JustADream

Thanks. The car will be a beater drift car....hence the budget. Hoping to pull off the same wheels except in 18x10.5

TheBry

iTrader: (2)

sleepywgn

Yes sir. 18X10/11

YUP! WFC Fam all day every day! Thanks.

THANK YOU!

THANKS!

DannySz

new to the game

flyboyplo

Dude how did you do your tail lights if you don't mind me asking , I'v been all over the internet looking for clear or red tail light replacments and I can't find non ...

MikieLs400

I want me a double din now!

DannySz

SuicidnS13

iTrader: (2)

Just some fun with the iPhone the other day-


http://www.flickr.com/photos/suicidns13/8450517779/http://www.flickr.com/photos/suicidns13/8450517779/ by http://www.flickr.com/people/suicidns13/, on Flickr

http://www.flickr.com/photos/suicidns13/8450516367/http://www.flickr.com/photos/suicidns13/8450516367/ by http://www.flickr.com/people/suicidns13/, on Flickr

http://www.flickr.com/photos/suicidns13/8451604834/http://www.flickr.com/photos/suicidns13/8451604834/ by http://www.flickr.com/people/suicidns13/, on Flickr

Ls400RR

ls400geek

Introducing my LS400 (I'll do more pictures some other day) :