LS - 1st and 2nd Gen (1990-2000) Discussion topics related to the 1990 - 2000 Lexus LS400

LS400 owners post your wheel setup

Thread Tools
 
Search this Thread
 
Old 07-26-13, 03:35 PM
  #1441  
PureDrifter
BahHumBug

iTrader: (10)
 
PureDrifter's Avatar
 
Join Date: Aug 2004
Location: California
Posts: 23,918
Received 94 Likes on 86 Posts
Default

Originally Posted by VanCityLS4
I know there was some talk a few pages back but can anyone confirm if the 17x8 +45 IS250 ten spoke wheels will fit over UCF20 calipers. FAQ says any IS wheel fits but I havent seen 17" IS rims, only the GS varity on here. Gotta piece together my winter set up & I need to know this soon !!!
if they clear is350 calipers they should fit.
Old 07-26-13, 04:21 PM
  #1442  
flipside12
Rookie
iTrader: (1)
 
flipside12's Avatar
 
Join Date: Aug 2012
Location: NC
Posts: 59
Likes: 0
Received 0 Likes on 0 Posts
Default

my set up. Work euroline dh 18x9/10 +7 with my spacers


Name:  null_zps1595d3c5.jpg
Views: 3060
Size:  89.1 KB
Old 07-26-13, 11:52 PM
  #1443  
VanCityLS4
Lead Lap
iTrader: (1)
 
VanCityLS4's Avatar
 
Join Date: Nov 2002
Location: PacificNorthWest
Posts: 623
Received 75 Likes on 55 Posts
Default

Originally Posted by PureDrifter
if they clear is350 calipers they should fit.
More searching allowed me to confirm that any 17" ISx50 wheel will clear larger IS350 calipers. I think this is the best 17" winter set up for UCF20 at 17x8 +45. My six spoke LS430 17x7.5 are leaking are like crazy possibly through the chipping/flaking chrome.

https://www.clublexus.com/forums/is-...-wheels-2.html
Old 07-28-13, 04:57 PM
  #1444  
jcp2k
Rookie
 
jcp2k's Avatar
 
Join Date: Jul 2013
Location: SGV 626
Posts: 82
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by GitaOnCCWs
Hey guys, figured id share my setup. Varrstoen ES2 in 19x9.5 and 19x10.5 +12. suspension is done with a set of BC Extreme Drops with a 20kg/18kg setup. still need to finish bodywork and then car will be going all matte white. hope you guys enjoy.






Did you pull the fenders or is this just a roll?
Old 07-30-13, 04:25 AM
  #1445  
GitaOnCCWs
Driver School Candidate
 
GitaOnCCWs's Avatar
 
Join Date: Oct 2011
Location: FL
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by jcp2k
Did you pull the fenders or is this just a roll?
they are rolled, but pulled quite a bit. they did dimple in a few spots as expected, but after doing some bodywork everything looks pretty good. ill post some updated pictures here soon.
Old 07-30-13, 09:47 PM
  #1446  
jcp2k
Rookie
 
jcp2k's Avatar
 
Join Date: Jul 2013
Location: SGV 626
Posts: 82
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by GitaOnCCWs
they are rolled, but pulled quite a bit. they did dimple in a few spots as expected, but after doing some bodywork everything looks pretty good. ill post some updated pictures here soon.
Sounds good car looks very nice. And as far as the spring rates did you have to revalve the shocks to run them?
Old 07-30-13, 09:48 PM
  #1447  
radiokilla
Lead Lap
 
radiokilla's Avatar
 
Join Date: Feb 2010
Location: CA
Posts: 567
Likes: 0
Received 2 Likes on 2 Posts
Default



18x9.5 18x10 Work VSKF
Old 07-31-13, 05:04 AM
  #1448  
python
Lexus Champion
iTrader: (4)
 
python's Avatar
 
Join Date: Jan 2008
Location: ca
Posts: 1,840
Received 26 Likes on 24 Posts
Default

where did u get that lip kit radio?
Old 07-31-13, 07:54 AM
  #1449  
OKSTANCE
Lead Lap
 
OKSTANCE's Avatar
 
Join Date: Apr 2011
Location: OK
Posts: 702
Likes: 0
Received 2 Likes on 2 Posts
Default

yo guys I finally sold my gramlights but I need to figure out what tire sizes to run on my ucf11
wheel specs are guna be 18x10+22 all around probably unless I puss out and get 9s up front
but im thinking with a shave and pull those could fit up front without a ton of camber

lmk what you guys think =]
love the setup radiokilla! I need to get one of those lips asap cus im lowering my car more for the new setup
Old 07-31-13, 11:06 AM
  #1450  
Kira X
美少女戦士セーラームーン

iTrader: (24)
 
Kira X's Avatar
 
Join Date: Oct 2008
Location: 東京都
Posts: 11,189
Received 409 Likes on 337 Posts
Smile

Originally Posted by GitaOnCCWs
super stiff, but its the way I wanted it. I still rub every now and again so ive still got tweaking to do, but overall its not bad for me.
I figured it wouldn't rub but you are pretty low. It looks like a nice setup.
Old 07-31-13, 11:09 AM
  #1451  
Kira X
美少女戦士セーラームーン

iTrader: (24)
 
Kira X's Avatar
 
Join Date: Oct 2008
Location: 東京都
Posts: 11,189
Received 409 Likes on 337 Posts
Smile

Originally Posted by 240benzo
yo guys I finally sold my gramlights but I need to figure out what tire sizes to run on my ucf11
wheel specs are guna be 18x10+22 all around probably unless I puss out and get 9s up front
but im thinking with a shave and pull those could fit up front without a ton of camber

lmk what you guys think =]
love the setup radiokilla! I need to get one of those lips asap cus im lowering my car more for the new setup
It's good to hear you sold the wheels. I think you should go with 19"s to be honest. I'm not too familiar with the fenders on the UCF10's but how about a 19x9.5 front and 19x10.5 rear setup?

What kind of wheels are you going to get?
Old 07-31-13, 12:30 PM
  #1452  
timmy0tool
Moderator
iTrader: (7)
 
timmy0tool's Avatar
 
Join Date: Sep 2008
Location: 714/949, SoCal
Posts: 6,927
Received 415 Likes on 370 Posts
Default

i like 19s on UCF20s and 18s on UCF10s but that's my opinion. with x10 +22 all around you can stagger the tire sizes to get better clearances. not sure as to what sizing is appropriate though.
Old 07-31-13, 01:13 PM
  #1453  
OKSTANCE
Lead Lap
 
OKSTANCE's Avatar
 
Join Date: Apr 2011
Location: OK
Posts: 702
Likes: 0
Received 2 Likes on 2 Posts
Default

if I got 19s they would have a higher offset around 35
id ask if anyone knows the highest offset 10" wheel would fit without hitting anything on the inside
but I know thatd depend on the face shape and If theres any concave etc
looking at some rays lexions tho
Old 07-31-13, 09:14 PM
  #1454  
jcp2k
Rookie
 
jcp2k's Avatar
 
Join Date: Jul 2013
Location: SGV 626
Posts: 82
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by radiokilla


18x9.5 18x10 Work VSKF
Dear lord baby Jesus I love that stock brown paint... Im really considering painting my first gen this color when the time comes
Old 08-01-13, 05:17 AM
  #1455  
DannySz
Rookie
 
DannySz's Avatar
 
Join Date: Feb 2013
Location: Guangdong
Posts: 74
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by timmy0tool
i like 19s on UCF20s and 18s on UCF10s but that's my opinion. with x10 +22 all around you can stagger the tire sizes to get better clearances. not sure as to what sizing is appropriate though.
225 front and 235 rear i think is best


Quick Reply: LS400 owners post your wheel setup



All times are GMT -7. The time now is 03:48 AM.