LS - 1st and 2nd Gen (1990-2000) Discussion topics related to the 1990 - 2000 Lexus LS400

Question about tire cupping!

Thread Tools
 
Search this Thread
 
Old 08-24-06, 06:33 PM
  #1  
Smoothie22
Driver School Candidate
Thread Starter
 
Smoothie22's Avatar
 
Join Date: Mar 2006
Location: Fl
Posts: 31
Likes: 0
Received 0 Likes on 0 Posts
Default Question about tire cupping!

After researching the forum about tire cupping, I think I have come to the conclusion that my stuts are bad. I have a 1999 with stock suspension and 20 inch wheels. The tires just started to cup not too long ago. My question is if I drop the car and get springs and struts will the cupping go away over time? I was thinkin about waiting if the tires are not going to get any better, and just do it all in one shot! My thinking was if the tires is hopping up and down ever so slightly that with the new struts if will wear down the high parts in the tire. Has anyone ever had any success with this? Here is a pic of the car:

Old 08-24-06, 08:46 PM
  #2  
PureDrifter
BahHumBug

iTrader: (10)
 
PureDrifter's Avatar
 
Join Date: Aug 2004
Location: California
Posts: 23,918
Received 94 Likes on 86 Posts
Default

did u get an alignment done after u had the lowering done and the wheels put on?
Old 08-24-06, 10:28 PM
  #3  
RA40
Super Moderator

iTrader: (6)
 
RA40's Avatar
 
Join Date: May 2003
Location: California
Posts: 20,850
Received 463 Likes on 361 Posts
Default

The 20's may be a bit much for the suspension so minute road changes will have them bouncing along. I see it frequently on the road with cars with big whees and stock suspensions. My suggestion is to update the suspension and you should see an improvement. That is presuming there are no other worn suspension parts that need to be replaced.
Old 08-29-06, 11:41 AM
  #4  
Smoothie22
Driver School Candidate
Thread Starter
 
Smoothie22's Avatar
 
Join Date: Mar 2006
Location: Fl
Posts: 31
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by PureDrifter
did u get an alignment done after u had the lowering done and the wheels put on?
No I didn't get an alignment done after I got the wheels on. I was supposed to get the drop kit right after I put the wheels on, but that never happened. Once I get the drop kit I was going to get the alignment!

Originally Posted by RA40
The 20's may be a bit much for the suspension so minute road changes will have them bouncing along. I see it frequently on the road with cars with big whees and stock suspensions. My suggestion is to update the suspension and you should see an improvement. That is presuming there are no other worn suspension parts that need to be replaced.
I will have to check out the suspension components! I have had big wheels on other cars and it has never been a problem! The cupping is not really all that bad I guess I am just a little ****!! Springs and struts should be on by the end of september. We'll see what happens!!!

Thanks for the replies! Sorry it took so long for me to get back, i had to take an emergency trip to North Carolina!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
DerekD1010
LS - 1st and 2nd Gen (1990-2000)
8
03-28-17 08:07 PM
Tommytbone
ES - 5th Gen (2007-2012)
8
11-04-16 01:55 PM
millertime
Suspension and Brakes
2
08-11-15 12:05 AM
SinisterIS
IS - 1st Gen (2001-2005)
1
03-01-12 12:51 AM
panda86
IS - 1st Gen (2001-2005)
11
09-09-09 12:19 AM



Quick Reply: Question about tire cupping!



All times are GMT -7. The time now is 08:32 AM.