Notices
Lighting A place to ask questions about HIDs & other Lexus lights

Factory Fog light issues after using luminics bulbs

Thread Tools
 
Search this Thread
 
Old 12-05-11, 11:51 AM
  #1  
hanzie411
Driver School Candidate
Thread Starter
 
hanzie411's Avatar
 
Join Date: Nov 2009
Location: TX
Posts: 34
Likes: 0
Received 0 Likes on 0 Posts
Default Factory Fog light issues after using luminics bulbs

Ok, so anyone else out there that used the 9006 yellow luminics bulbs and now having or had fog light issues?? I had the passenger side stop working one day...figured the dang bulb just blew out...so put the stock bulb back in....worked fine for several days, then the driver went out...figured luminics bulb went out....no biggie, swapped with stock bulb for driver side. All was good for a while, now, both sides intermittently work and not work....did i screw up the wiring harness for the fogs by using those luminics bulbs? If so, what are my options? Can i go with HID kit for fogs? Does that utilize the factory wiring harness for the fogs though?
Old 12-05-11, 12:14 PM
  #2  
AUTO Design
Former Sponsor
 
AUTO Design's Avatar
 
Join Date: Nov 2011
Location: South El Monte, CA
Posts: 316
Likes: 0
Received 0 Likes on 0 Posts
Default

Yes you can use HID kit for your foglight. We sell the high quality HID kit. Let me know if you need to get a set from us!!!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
skullkandy
IS - 2nd Gen (2006-2013)
8
08-30-12 06:07 PM
T4RBoarder
LX - 1st and 2nd Gen (1996-2007)
11
02-03-10 03:39 PM
italiandud
IS - 2nd Gen (2006-2013)
10
11-22-07 04:03 PM
misterk
LS - 4th Gen (2007-2017)
4
10-01-07 08:31 AM
goral19
GS - 2nd Gen (1998-2005)
2
10-15-01 11:19 PM



Quick Reply: Factory Fog light issues after using luminics bulbs



All times are GMT -7. The time now is 06:55 PM.