lexus4jess

new vid

Here is a night video.Very easy to hook up.You have the power and gruond.Then the 4 wire to the motor.Done.easy As 123.You can leave the power seitch in the on postion and just run a power switch to the inside of the car.I would put a push switch.So I can just tap it to make it move.

Hope the info. is useful.

Night video click here

Ali SC3

iTrader: (10)

dude, seriously take it easy. i was kidding around. i did say they were for the lights didn't I. The reason i was not 100% sure is that there are probably tons of more uses for those things. hence they sell it in hobby shops.

lexus4jess

I had the box for about 7 month.Just never got around to test it.Sure was easy though.Should of had a V8.dud

elucid8

ah, saw this at hidp day before yesterday. looks like it wouldn't be too much of a hassle to use on relatively flat roads.

gldndrgn14

iTrader: (6)

nice find jess

lexusscturbo

iTrader: (12)

This works on 2nd Gen GS headlights right??

chris12300

hey! i love your idea for working the auto-leveling motors. Do you know how you could work the motors using the ramsey device (or some other device) but using a different switch, something like a potentiometer for direction?

so that...

rotating to the right would push the motor all the way out
rotating all the way to the left would pull the motor all the way in
with the rotation in the middle, the motor pushed half way out

Thank you for any advice!

emoshun

iTrader: (11)

Welcome to CL Chris!

lexus4jess

I'm tring to see if I can mount the box under the dash an dthe control ***** attached on another small box or just straight to the dash panel.

lexus4jess

yes is does.works with any leveling motor.From what I see, there are two motors inside.

Shakimy

I dont mean to sound wierd but why would I manually want to do it if the car already does it? or maybe I misunderstand what the purpose for this is :S

lexus4jess

If you don't have hid headlights and do a retro on them, you can control the height of the light beam.