MD 98 Ren Red SC300
07-27-14, 09:48 AM
#1
Rookie
Thread Starter
Join Date: Aug 2002
Location: Maryland
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
98 Ren Red SC300
SOLD
I bought this car a year ago planning to do a big build but have chosen to do otherwise. It's a really nice car that runs and drives well. I would just drive it daily if I didn't a 100 mile commute each day.
-New paint recently
-Wheels and tires in good shape with a few nicks around the lugs
-Tanabe lowering springs
-HID low beams
-Low beams and fogs have yellowing
-CD changer does not work
-Timing belt done recently
-Could use a slight alignment I think
-Interior in good shape for its age...has some typical seat cracks
-Scratch to right rear quarter panel (pictured)
-Driver rear bumper scuff (pictured)
The car has been in one minor accident that I know of. The rear passenger side lower bumper/quarter panel were pressed in. I have a picture of the damage before it was fixed, I just have to dig it up from an old computer. If someone is interested I will get it to you. Other than that the passenger front fender is missing a VIN#, not sure why.
I bought this car a year ago planning to do a big build but have chosen to do otherwise. It's a really nice car that runs and drives well. I would just drive it daily if I didn't a 100 mile commute each day.
-New paint recently
-Wheels and tires in good shape with a few nicks around the lugs
-Tanabe lowering springs
-HID low beams
-Low beams and fogs have yellowing
-CD changer does not work
-Timing belt done recently
-Could use a slight alignment I think
-Interior in good shape for its age...has some typical seat cracks
-Scratch to right rear quarter panel (pictured)
-Driver rear bumper scuff (pictured)
The car has been in one minor accident that I know of. The rear passenger side lower bumper/quarter panel were pressed in. I have a picture of the damage before it was fixed, I just have to dig it up from an old computer. If someone is interested I will get it to you. Other than that the passenger front fender is missing a VIN#, not sure why.
Last edited by KOdoubleUR; 11-24-14 at 02:08 AM. Reason: Sold
07-29-14, 11:32 AM
#4
Looks pretty clean. What made you change your mind about going all out on it?
Will the car pass maryland inspection as it sits?
Do All the power options work, ac blow cold etc?
No CEL or codes to fail md emissions test?
Will the car pass maryland inspection as it sits?
Do All the power options work, ac blow cold etc?
No CEL or codes to fail md emissions test?
11-11-14, 08:21 AM
#5
Rookie
Thread Starter
Join Date: Aug 2002
Location: Maryland
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys, bumping this back up.
I was thinking I was gonna keep it but am deciding to sell. I need to unload it within a month so take a look at it and give me some offers. I am a motivated seller.
To answer the questions above...
I see no reason why it would not pass MD inspection.
All power options work except for the CD changer and the seat memory. The ac was starting to die off at the end of summer. I bought a recharge kit but have not used it.
Also when it is cool out (below about 45°) the tail light failure light comes on intermittently when you hit the brakes. Although, all the lights are working.
$4500 OBO
I was thinking I was gonna keep it but am deciding to sell. I need to unload it within a month so take a look at it and give me some offers. I am a motivated seller.
To answer the questions above...
I see no reason why it would not pass MD inspection.
All power options work except for the CD changer and the seat memory. The ac was starting to die off at the end of summer. I bought a recharge kit but have not used it.
Also when it is cool out (below about 45°) the tail light failure light comes on intermittently when you hit the brakes. Although, all the lights are working.
$4500 OBO
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
gustervon
IS - 2nd Gen (2006-2013)
2
04-12-18 07:35 PM