PA FS: 1999 Lexus GS300 with GTE Aristo Engine
#1
Pole Position
Thread Starter
iTrader: (13)
Join Date: Jun 2008
Location: PA
Posts: 265
Likes: 0
Received 0 Likes
on
0 Posts
FS: 1999 Lexus GS300 with GTE Aristo Engine
Name: Julio M
Location: Philadelphia, PA 19133
Contact Info: molinajulior@gmail.com
Year: 1999
Make: Lexus
Model: GS300 with GTE Aristo Engine
Color: Black / Black
Mileage: see below
Transmission: Automatic
Price: 9800
Description: I'm testing out the waters here. I bought this at the begining of year and was planing on going all out with it but right now other duties are holding me from doing anything. If it doesn't sell then its no biggie. The car is a 1999 Lexus GS300 2jz-gte twin turbo, Black on Black, 220k miles(about 88k on motor), aristo auto trans, coilovers, HIDs, LEDs.
It has...
Exterior:
Seibon OE CF Hood with Aerocatch hood pins
Black housing oem headlights with HID kit
LED tail lights
Engine/trans:
JZS147 Aristo 2jz-gte swap(124km w/ new timing belt, acc belt, water pump), aristo auto trans
Autobahn88 with Apexi Intake
Custom FMIC
Electronic exhaust dump
Autometer CF Boost and Coolant Temp gauges
Brakes:
Front LS400 front 4-pot brakes w/ slotted rotors and stainless lines
Project Mu B-Series street/track pads
Rear slotted rotors with oe pads
Suspension:
BC BR Coilovers
URAS Pineapple Poly Tilt Subframe spacers
TRD #2 front caster arm bushings
FIGS Engineering Outer Tie Rods with URAS Steering Up Spacers and Moog inners
Daizen FLCA Poly bushings
New Steering Rack last March
SPC Prototype Front Upper control arms(new ball joints 12/13)
Moog Front Lower ball joints (10/13)
Front LCA Poly bushings
FIGS Front RCA’s
FIGS Rear Toe Links
FIGS Rear TRAC Links with TRD knuckle bushings
The Bad:
the usual fender damage from slammed on wheels.
the a/c doesnt work due to first gen aristo swap needing to be wired up with a relay
hvac system needs a servo replaced which i have but haven't done it.
rear driverside door lock actuator just went.
Seibon hood isn't the best fitting
Pictures
Stickers are gone!
How the car looks today.
Pictures as of saturday.
Rear needs to be adjusted which i'll get to sooner or later.
More pictures will be uploaded as soon as i have more.
PM me with questions! Do not post or PM if you do not have any interest in buying.
Thanks!
Location: Philadelphia, PA 19133
Contact Info: molinajulior@gmail.com
Year: 1999
Make: Lexus
Model: GS300 with GTE Aristo Engine
Color: Black / Black
Mileage: see below
Transmission: Automatic
Price: 9800
Description: I'm testing out the waters here. I bought this at the begining of year and was planing on going all out with it but right now other duties are holding me from doing anything. If it doesn't sell then its no biggie. The car is a 1999 Lexus GS300 2jz-gte twin turbo, Black on Black, 220k miles(about 88k on motor), aristo auto trans, coilovers, HIDs, LEDs.
It has...
Exterior:
Seibon OE CF Hood with Aerocatch hood pins
Black housing oem headlights with HID kit
LED tail lights
Engine/trans:
JZS147 Aristo 2jz-gte swap(124km w/ new timing belt, acc belt, water pump), aristo auto trans
Autobahn88 with Apexi Intake
Custom FMIC
Electronic exhaust dump
Autometer CF Boost and Coolant Temp gauges
Brakes:
Front LS400 front 4-pot brakes w/ slotted rotors and stainless lines
Project Mu B-Series street/track pads
Rear slotted rotors with oe pads
Suspension:
BC BR Coilovers
URAS Pineapple Poly Tilt Subframe spacers
TRD #2 front caster arm bushings
FIGS Engineering Outer Tie Rods with URAS Steering Up Spacers and Moog inners
Daizen FLCA Poly bushings
New Steering Rack last March
SPC Prototype Front Upper control arms(new ball joints 12/13)
Moog Front Lower ball joints (10/13)
Front LCA Poly bushings
FIGS Front RCA’s
FIGS Rear Toe Links
FIGS Rear TRAC Links with TRD knuckle bushings
The Bad:
the usual fender damage from slammed on wheels.
the a/c doesnt work due to first gen aristo swap needing to be wired up with a relay
hvac system needs a servo replaced which i have but haven't done it.
rear driverside door lock actuator just went.
Seibon hood isn't the best fitting
Pictures
Stickers are gone!
How the car looks today.
Pictures as of saturday.
Rear needs to be adjusted which i'll get to sooner or later.
More pictures will be uploaded as soon as i have more.
PM me with questions! Do not post or PM if you do not have any interest in buying.
Thanks!
Last edited by empera; 06-25-14 at 09:29 AM.
#7
Pole Position
Thread Starter
iTrader: (13)
Join Date: Jun 2008
Location: PA
Posts: 265
Likes: 0
Received 0 Likes
on
0 Posts
Okay i'd like to sell this car....it runs strong and i love the twins. I do love the car but i want someting newer. Right now im working on flushing the coolant system. Asking 8.5k As is.
Trending Topics
#10
Pole Position
Thread Starter
iTrader: (13)
Join Date: Jun 2008
Location: PA
Posts: 265
Likes: 0
Received 0 Likes
on
0 Posts
Installed brand new stock denso radiator. I replaced one LBJ but may have to do the other...some noise and vibration...sourcing and fixing it soon
Last edited by empera; 05-06-15 at 07:55 AM.
Thread
Thread Starter
Forum
Replies
Last Post
DrLex
GS - 1st Gen (1993-1997)
19
01-03-16 04:11 PM
CAN-Toronto Fs 1993 lexus gs300 2jzgte aristo swap
CHASER4LIF
Lexus Vehicles Classifieds
5
03-18-13 06:23 PM
CAN-Toronto Fs 1993 LEXUS GS300 2JZGTE / Aristo $7800
CHASER4LIF
Lexus Vehicles Classifieds
5
01-24-13 05:40 PM