TTurboPimp

iTrader: (12)

Ok, Here's the deal, I have the opportunity to get a great deal on another toy, so Im putting my baby up for sale. If the other deal goes away, then my car will be off the market. I love the car, and if I dont get the chance to get the other car, then I will gladly keep this one in my garage.

The car is the only 1UZ twin turbo GS with the V160 6 spd in the country....that i know of anyhow.

When the car was first built by SRT it put down 569rwhp and 654rwtq. That was on 18lbs of boost, pump gas, and running a TH400 tranny. The TH400 tranny is said to rob roughly 30% power on the dyno. It now has the V160 6 speed, so those numbers should be higher now in theory.

The car itself has 77k on it, the rest of the build has roughly 3k miles, thats it. The car doesnt get driven as much as it should. Everything has virtually no miles, motor, tranny, suspension, wheels, tires, etc, etc, etc.....

I am the second owner of the car, and have owned it for most of its life. The car has never been in an accidnet and has no paint work other than the body kit.

Here is a complete spec sheet on the car, Im sure I'm missing some small things

2000 GS 400 Platinum edition

ENGINE TYPE:
_SRT built 1UZ Twin Turbo with fully built motor

DISPLACEMENT:
_4.0 Litre

ENGINE MODS:
_ Precision (Twin) GT32-55 Turbochargers (polished housings)
_ Tial (Twin) 38mm Wastegates
_ Blitz (dual) Blowoff Valves
_ Precision Front mount Intercooler (custom to SRT specs)
_ Burns Stainless T304 powder coated intercooler piping
_ Burns Stainless T304 SS Mandrel-Bent Down Pipe(ceramic coated)
_ Burns Stainless T321 S Turbo Manifolds (ceramic coated)
_ Burns Polished 3.5in. Aluminum Intake Pipe
_ Caterpillar SS Braided Turbo Supply/Drain Lines
_ Caterpillar SS Braided Fuel Supply/Return Lines
_ 750 cc/min. Fuel Injectors
_ Aeromotive Fuel Pressure Regulator
_ NGK Platinum Race Plugs
_ Walbro (Twin) Fuel Pumps – 225L/hr.
_ Ross Forged Pistons
_ Cunningham Forged Rods
_ Toyota Forged Crank
_ SRT Ported and Polished Heads
_ Titanium valve springs / Retainers / Seats
_ ARP Hardware
_ Accufab 85mm throttle-body
_ Battery relocated to trunk
_ ECU relocated to battery location
_ Chrome plated manifold, timing gear covers, and valve covers
_Greddy catch can

ENGINE
MANAGEMENT
_ Haltech E11v2 EMS @ 3bar max
_ Blitz Fatt DC Turbo Timer
_ Blitz SBC-ID Boost Controller
_ Blitz Power Meter I-D
_ PLX wide-band A/F Ratio Sensor mounted in clock location
_ Autometer Super light boost gauge
_ Racelogic Traction Contol Unit

DRIVE TRAIN:
_ Getrag V160 Supra TT 6 speed swap
_Clutchmaster Stage 4 custom clutch with custom one off flywheel
_TTC performance adapter plates
_ SC300 pedals and Supra master cylinder
_ GS400 rear with TRD LSD
_ custom drive shaft


SUSPENSION:
_ Apex I race coilovers
_TRD Recalibrated Steering ECU
_TRD Front / Rear Heavy Duty Sway Bars
_TRD Heavy Duty Carriage Brace
_RMM Front Upper Strut Tower Bar (chrome plated)



EXHAUST:
_Greddy Mufflers W/ 4 in. Tips
_SRT Custom SS Mandrel Bent 3 inch dual Exhaust
_Magnaflow X pipes


BRAKES:
_Supra twin turbo big brake swap

WHEELS:
_HRE 543R (20x9 / 20x11)
polished face and lip
polished inner barrels

TIRES:
_Conti Sports (245/35ZR20 Front),(305/25ZR20 rear)


EXT. MODS:
_Vertex full body kit
_WIN Racing trunk spoiler
_VIS carbon fiber vented hood
_TRD grill
_roof spoiler


ELECTRONICS:
_ Kenwood DDX 7015 DVD player
_ Kenwood 6 disk CD changer
_ DDmats front and rear 6.5” seperates
_ JL Audio 1000/1 sub amp
_ JL Audio 300/4 speaker amp
_ JL Audio 12W7
_ custom trunk set up with fiberglass amp rack and sub box




I have over 30k in the motor, tt kit, and electronics. There's not much thats a bolt on affair when building a 1UZ, so its not cheap to do so. I have another 8k into the 6 spd conversion. 6 grand into the HRE's, etc, etc, etc....I have a ****load of money into this car, but I am only asking what I need for the next project.

I am selling for 25k, which is literally 1/3rd of what I have into the car.

I would also entertain selling the car minus the wheels and or stereo system and take some money off the asking price. You will need wheels to put back on it though. I do not have the stock wheels or system.

Feel free to hit me up with any questions......serious buyers only please.

Here is a link to a few pics of the car when the 6spd was completed. The only difference is itnow has a carbon fiber vented hood.

https://www.clublexus.com/forums/per...d-is-done.html

Here you go, I added some current pics form today with the carbon fiber hood. I was in between painting it or leaving it carbon, it is clearcoated and looks good.

The car is a bit dusty form sitting in my garage, but I didnt want to get into washing it before taking pics in this hot *** weather. You can get the idea. I was aksed for interior pics, so there are lot of them. The interior is 9.5 out of 10. The only reason it isnt a 10 is because there is some spots on the floor mats, and very very slight wear on the drivers seat bolster, and I mean very slight!! I havent got around to making the shift boot for the 6spd shifter, so its open by the shifter at the moment. This is an inexpensive task to complete, just havent got around to it.













thanks

IM UPDATING THE THREAD AND BRINGING IT BACK TO LIFE.

I stepped away from selling the car for the past month or so because I was still putting money into it trying to perfect it, in my mind anyhow. I wasnt crazy about the clutch set up, and didnt have any other options with this set up. It was strictly a race clutch, very tricky to drive. Since then, I have had a custom flywheel made that allows me to use any Supra TT clutch of choice, opening up all kinds of options. I went with a Clutchmasters Stage 4 smade to specifics for SOund Performance. This clutch is perfect. It is streetable and drives like a stock clutch, but it will also hold over 800 rwhp and tq.

With the new clutch set up, the car is now perfect, and exactly how I envisioned the 6 spd swap when I started this endevour. I have also had the center console finished with shift boot, etc, so its not just a hole now. It looks like it should look.

I dropped another $3500 into the car for the clutch, flywheel, and center console...parts, labor, etc, etc.. I am still aksing 25k, but my price is now FIRM! I will not sell it for a penny less than that, and its well worth it.

****UPDATE****
I will also entertain trades of equal value......specifically an LS430, SC430, or full size SUV of equal mileage and value......must be real clean. Im not limiting it to these vehicles, thats just what I would prefer to get into.

aka paco

iTrader: (15)

very nice budget build you have there..


j/k man your car is ridiculous! in a amazing way, I can't imagine how fun that must be to drive, very nice build, I remember seeing a few of your posts along time ago when i had a SC, but i forgot this car exisited.. GLWS, I can't possibly imagine how much blood, sweat, and cash was put into this car.

Avarec

where in md is it? car is off the hook

TTurboPimp

iTrader: (12)

crofton, down by capitol speedway

perry05g35

iTrader: (4)

My word that's an amazing car!

Hardrvin

Very Sharp. If you don't mind sharing, what's the potential toy. Just curious if I have something similar to offer though I'm doubting it.

TTurboPimp

iTrader: (12)

pics added

Rock-a-Lex

iTrader: (4)

Unbelievable! One question. Can you spin 'em at 60? I tell you what, if I can sell my car for half that amount I would buy yours! Oh, last thing, can it legitimately pass inspection? I.e. are there any CELs?

TTurboPimp

iTrader: (12)

No CEL's, I dont see why it wouldnt go through inspection. It might not pass Emissions due to no cat, but thats failry easy to get around, at least in Maryland.

Trust me, I wouldnt be selling it for this cheap if I didnt have another great deal in front of me. Im asking what I need basically, trying to get it to move before the other deal goes away. I have triple this into the car for sure.

TTurboPimp

iTrader: (12)

Ok, im getting alot of what seems to be serioius inquiries on the car, so I put up a more serious FS ad. I added a full spec sheet on the build, rather than the cliff note version.

Also, Its been asked if I am willing to ship the car. The answer is yes, if funds are verified in my bank account and buyer pays for shipping, I will ship and work with the buyer to be around for a shipping company. I did this with a few motorcycles I have sold over the years, it worked out smoothly.

Hyaku

Very new to the scene I have been looking at this website for about a year now trying to learn as much as I can still looking for my dream GS.
Awesome car, I just sent a PM to TTurboPimp. Hopefully I did that right.

tuterz

iTrader: (11)

damn.. this thing is a steal!

TTurboPimp

iTrader: (12)

I have recieved alot of PM's on the car, all have been answered as of a few minutes ago.

Yes it is, its almost sickening to let it go for this knowing what I have into the car over the years. Not just money, but the time, sweat, emotions, passion, etc.!

I can tell you that if I didnt have another great deal lined up, I wouldnt be selling the car.

All part of the game I guess!

plex

iTrader: (11)

Dag Pimp say it ain't so, your price is a steal. Folks buy with confidence, the pics don't do justice. I've seen this car in person and have bought and sold stuff with the seller over the last few years with no issues.

I'm sure the potential new toy will be just as fun.

TTurboPimp

iTrader: (12)

thanks bro......I was thinking about you the other day when I was cleaning my interior. I still owe you a few dollars for that Greddy shift ****! Are you gonna be around Ben's shop anytime in the near future? Im going by there this afternoon, I can give it to him to hold for you if that works for you.