NY 95 sc300 blk/blk 5spd manual / 97 upgrade
#1
Pole Position
Thread Starter
iTrader: (3)
Join Date: Jun 2009
Location: NY
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
95 sc300 blk/blk 5spd manual / 97 upgrade
I ran into some real financial issues out of no where and Im contemplating selling my sc or my truck to fix the issue. So i'll be testing waters to see if I can get what I'd like for the car. If I don't get what I want for the car i'll just end up keeping until I can find a way to continue work on it.
95 Sc300/97 upgrade
Manual
149k Miles
Clean Ny title.
kyb supra tt shocks / eibach pro kit tt springs. (500 miles at most on them)
supra tt rims with fresh tires all round.
Most of you should know how rare this car is. Blk/blk manual with the 97 upgrade. All parts are OEM and were purchased from aliga. The car was almost flawless until I got into a minor bumper to bumper with someone last week. When I say minor, I mean minor. Only thing you will need is a radiator support. Hood, fenders, bumper lights are all fine. Bumper just got pushed in a bit with the support which causes the misalignment now.
Here are the pics of the car overall. I will post pics of the radiator support damage later this week. Bumper still goes on and all but won't line correctly without new support.
I have done all the major maintenance on the car including changing all gaskets and seals, tune up, tires, etc... exception of timing belt. You have time.
$6500. $6000 with stock rims.
95 Sc300/97 upgrade
Manual
149k Miles
Clean Ny title.
kyb supra tt shocks / eibach pro kit tt springs. (500 miles at most on them)
supra tt rims with fresh tires all round.
Most of you should know how rare this car is. Blk/blk manual with the 97 upgrade. All parts are OEM and were purchased from aliga. The car was almost flawless until I got into a minor bumper to bumper with someone last week. When I say minor, I mean minor. Only thing you will need is a radiator support. Hood, fenders, bumper lights are all fine. Bumper just got pushed in a bit with the support which causes the misalignment now.
Here are the pics of the car overall. I will post pics of the radiator support damage later this week. Bumper still goes on and all but won't line correctly without new support.
I have done all the major maintenance on the car including changing all gaskets and seals, tune up, tires, etc... exception of timing belt. You have time.
$6500. $6000 with stock rims.
Last edited by imarshall; 09-29-09 at 07:23 PM.
#3
Pole Position
Thread Starter
iTrader: (3)
Join Date: Jun 2009
Location: NY
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
thanks bro. its actually not that bad. I tapped the bumper on the right side just enough to push the bumper in a bit so the only thing off right now is the driver side high beam. I'm going to try to straighten that however, so there may be no need for anyone to do anything. ill take pics today.
#4
Driver School Candidate
Join Date: Sep 2009
Location: NJ
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
#5
Pole Position
Thread Starter
iTrader: (3)
Join Date: Jun 2009
Location: NY
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
Snapped one pic with my phone. Kinda dark out right now. But this is with the bumper off but just sitting on the car i suppose. Havent gotten to fixing anything but as you can see, everything is clearly in decent condition.
Trending Topics
#8
Pole Position
Thread Starter
iTrader: (3)
Join Date: Jun 2009
Location: NY
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
Not sure how lower I'd go. Ill see.
Sure thing I'll have pics tomorrow of rad support and so on. The hood was red when I bought it. I just rattle canned it black. Was going to paint the whole car.
Sure thing I'll have pics tomorrow of rad support and so on. The hood was red when I bought it. I just rattle canned it black. Was going to paint the whole car.
#10
Pole Position
Thread Starter
iTrader: (3)
Join Date: Jun 2009
Location: NY
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
Snapped a pic today. Had my bodywork guy come over and take a look.
Heres the radiator support.
the dents are from us hammering it down slightly. the hood lines up everything. i was under the impression this was what needed to be replaced, however he told me its simply just the bumper support. I tried to circle where that is here. Again, bumper isnt on, just sitting.
So yea. Car just will need a bumper support.
Heres the radiator support.
the dents are from us hammering it down slightly. the hood lines up everything. i was under the impression this was what needed to be replaced, however he told me its simply just the bumper support. I tried to circle where that is here. Again, bumper isnt on, just sitting.
So yea. Car just will need a bumper support.
#15
Driver School Candidate
Join Date: Oct 2009
Location: ny
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts