FS: 92 SC300 5spd
#1
Rookie
Thread Starter
Join Date: Aug 2006
Location: VA
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
FS: 92 SC300 5spd
Hello guys, I have 92 sc300 5spd with 137k miles green with tan interior cloth seats.
Motor on this car had headgasket issues thus, pulled it out, so as of right now, it is missing quite a bit of pieces. The car was bought for 4k not too long ago with clear title. It is a project car for sale basically. I have to relocate out of country and this project must go asap. To tell you the truth, I have Vertex Ridge kit comming in on dec 12 for this car, and I need to sell that as well
**********Car will come with the following************
-Car itself
No Sunroof, Cloth tan interior, 5spd, green.
-Transmission (w58)
-17 stock chrome gs wheels ( rears keep leaking air )
-2000 sc300 tails (brand new from dealer, still in box)
All below are from 96 sc300 ( thanks gazi )
-96 AC comp
-currently has stripped interior for speakers etc swap
-all stock (radio) components(same as below minus the cd stuff)
-all stock pioneer 12disk changer components (HU, amp, speakers, wirings, etc)
-climate control (extra)
-new heater core (fan broke on the stock one)
-some interior pieces (extra)(butterfly cup holder, etc)
Now to the goodies
- 2jz-gte jdm motor with US cams and injectors. 37k miles
Bought from a member on SF and turns out that the block is rusted severely. In results, 2 of the valves are rusted and light surface rust on intake camshaft. Block can be bored out .020 and can be used as new.
-US 6spd wiring harness (uncut)
-US 6spd MT ecu
-JDM stock Twins
-Stock IC piping
-Ignitor etc
If you want, I also have brand new bare block 2jz-ge that can mate up nicely with the stock GTE internals that I have (extra set)
-2jz gte head (needs rebuild on 2 valves)
-2jz gte block toasted unless you want to rebuild it
-2jz ge block (brand new) got gte internals(50k miles) to go with and crankshaft
-2jz gte headgasket (Brand new)
-2jz gte mainstuds and headstuds (ARP) (BNIB)
-R154 transmission off mkiii
-Vertex Ridge widebody for the sc300
(currently #2 in the U.S.) Straight from Japan through S.A.
Not here just yet, but so far, it seems like the container hits on the dec 12.
I can call S.A. to hold off the shipping, for new owner. PM asap for this
I am trying to sell the whole thing as a package deal.
10k or OBO pm me.
Pick up only obviously!
pm me if you are really serious about the motor
Pix will be up soon. Sorry, I didnt add the location in the title. It is in Northern Virginia 20120.
You can have a Widebody sc300 with 2jzgte, ofcourse you have to build it yourself what fun is it when you buy a built car?
For the reference, I know quite a few IS300.net members that can vouch for me
Motor on this car had headgasket issues thus, pulled it out, so as of right now, it is missing quite a bit of pieces. The car was bought for 4k not too long ago with clear title. It is a project car for sale basically. I have to relocate out of country and this project must go asap. To tell you the truth, I have Vertex Ridge kit comming in on dec 12 for this car, and I need to sell that as well
**********Car will come with the following************
-Car itself
No Sunroof, Cloth tan interior, 5spd, green.
-Transmission (w58)
-17 stock chrome gs wheels ( rears keep leaking air )
-2000 sc300 tails (brand new from dealer, still in box)
All below are from 96 sc300 ( thanks gazi )
-96 AC comp
-currently has stripped interior for speakers etc swap
-all stock (radio) components(same as below minus the cd stuff)
-all stock pioneer 12disk changer components (HU, amp, speakers, wirings, etc)
-climate control (extra)
-new heater core (fan broke on the stock one)
-some interior pieces (extra)(butterfly cup holder, etc)
Now to the goodies
- 2jz-gte jdm motor with US cams and injectors. 37k miles
Bought from a member on SF and turns out that the block is rusted severely. In results, 2 of the valves are rusted and light surface rust on intake camshaft. Block can be bored out .020 and can be used as new.
-US 6spd wiring harness (uncut)
-US 6spd MT ecu
-JDM stock Twins
-Stock IC piping
-Ignitor etc
If you want, I also have brand new bare block 2jz-ge that can mate up nicely with the stock GTE internals that I have (extra set)
-2jz gte head (needs rebuild on 2 valves)
-2jz gte block toasted unless you want to rebuild it
-2jz ge block (brand new) got gte internals(50k miles) to go with and crankshaft
-2jz gte headgasket (Brand new)
-2jz gte mainstuds and headstuds (ARP) (BNIB)
-R154 transmission off mkiii
-Vertex Ridge widebody for the sc300
(currently #2 in the U.S.) Straight from Japan through S.A.
Not here just yet, but so far, it seems like the container hits on the dec 12.
I can call S.A. to hold off the shipping, for new owner. PM asap for this
I am trying to sell the whole thing as a package deal.
10k or OBO pm me.
Pick up only obviously!
pm me if you are really serious about the motor
Pix will be up soon. Sorry, I didnt add the location in the title. It is in Northern Virginia 20120.
You can have a Widebody sc300 with 2jzgte, ofcourse you have to build it yourself what fun is it when you buy a built car?
For the reference, I know quite a few IS300.net members that can vouch for me
Last edited by Twin Turbo; 12-11-06 at 07:55 AM.
#2
dubsonlexus
iTrader: (9)
Hello guys, I have 92 sc300 5spd with 137k miles in green with tan cloth interior.
Motor on this car had headgasket issues thus, pulled it out, so as of right now, it is missing quite a bit of pieces. The car was bought for 4k not too long ago with clear title. It is a project car for sale basically. I have to relocate out of country and this project must go asap. To tell you the truth, I have Vertex Ridge kit comming in on dec 12 for this car, and I need to sell that as well
**********Car will come with the following************
-Car itself with out stock motor, unless you want it
-Transmission
-17 stock chrome gs wheels ( rears keep leaking air )
-2000 sc300 tails (brand new from dealer, still in box)
All below are from 96 sc300 ( thanks gazi )
-96 AC comp
-currently has stripped interior for speakers etc swap
-all stock (radio) components(same as below minus the cd stuff)
-all stock pioneer 12disk changer components (HU, amp, speakers, wirings, etc)
-climate control (extra)
-new heater core (fan broke on the stock one)
-some interior pieces (extra)(butterfly cup holder, etc)
Now to the goodies
- 2jz-gte jdm motor with US cams and injectors. 37k miles
Bought from a member on SF and turns out that the block is rusted severely. In results, 2 of the valves are rusted and light surface rust on intake camshaft. Block can be bored out .020 and can be used as new.
-US 6spd wiring harness (uncut)
-US 6spd MT ecu
-JDM stock Twins
-Stock IC piping
-Ignitor etc
If you want, I also have brand new bare block 2jz-ge that can mate up nicely with the stock GTE internals that I have (extra set)
-2jz gte head (needs rebuild on 2 valves)
-2jz gte block toasted unless you want to rebuild it
-2jz ge block (brand new) got gte internals(50k miles) to go with and crankshaft
-2jz gte headgasket (Brand new)
-2jz gte mainstuds and headstuds (ARP) (BNIB)
-Vertex Ridge widebody for the sc300
(currently #2 in the U.S.) Straight from Japan through S.A.
Not here just yet, but so far, it seems like the container hits on the dec 12.
I can call S.A. to hold off the shipping, for new owner. PM asap for this
I am trying to sell the whole thing as a package deal.
10k or OBO pm me.
Pick up only obviously!
pm me if you are really serious about the motor, I may build it for you before I leave, of course for extra.
pix will be up upon request.
You can have a Widebody sc300 with 2jzgte, ofcourse you have to build it yourself what fun is it when you buy a built car?
Motor on this car had headgasket issues thus, pulled it out, so as of right now, it is missing quite a bit of pieces. The car was bought for 4k not too long ago with clear title. It is a project car for sale basically. I have to relocate out of country and this project must go asap. To tell you the truth, I have Vertex Ridge kit comming in on dec 12 for this car, and I need to sell that as well
**********Car will come with the following************
-Car itself with out stock motor, unless you want it
-Transmission
-17 stock chrome gs wheels ( rears keep leaking air )
-2000 sc300 tails (brand new from dealer, still in box)
All below are from 96 sc300 ( thanks gazi )
-96 AC comp
-currently has stripped interior for speakers etc swap
-all stock (radio) components(same as below minus the cd stuff)
-all stock pioneer 12disk changer components (HU, amp, speakers, wirings, etc)
-climate control (extra)
-new heater core (fan broke on the stock one)
-some interior pieces (extra)(butterfly cup holder, etc)
Now to the goodies
- 2jz-gte jdm motor with US cams and injectors. 37k miles
Bought from a member on SF and turns out that the block is rusted severely. In results, 2 of the valves are rusted and light surface rust on intake camshaft. Block can be bored out .020 and can be used as new.
-US 6spd wiring harness (uncut)
-US 6spd MT ecu
-JDM stock Twins
-Stock IC piping
-Ignitor etc
If you want, I also have brand new bare block 2jz-ge that can mate up nicely with the stock GTE internals that I have (extra set)
-2jz gte head (needs rebuild on 2 valves)
-2jz gte block toasted unless you want to rebuild it
-2jz ge block (brand new) got gte internals(50k miles) to go with and crankshaft
-2jz gte headgasket (Brand new)
-2jz gte mainstuds and headstuds (ARP) (BNIB)
-Vertex Ridge widebody for the sc300
(currently #2 in the U.S.) Straight from Japan through S.A.
Not here just yet, but so far, it seems like the container hits on the dec 12.
I can call S.A. to hold off the shipping, for new owner. PM asap for this
I am trying to sell the whole thing as a package deal.
10k or OBO pm me.
Pick up only obviously!
pm me if you are really serious about the motor, I may build it for you before I leave, of course for extra.
pix will be up upon request.
You can have a Widebody sc300 with 2jzgte, ofcourse you have to build it yourself what fun is it when you buy a built car?
#6
Rookie
Thread Starter
Join Date: Aug 2006
Location: VA
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
pictures are up. I can take more pictures upon request.
brand new GE block
w58 transmission, r154 pic can be taken.
New tails (stock 92s come with car)
GTE internals
and ofcourse I have all stock fenders, bumper, headlights etc.
GTE engine pictures will be taken only for serious buyer, as the head and wiring etc are boxed up.
Vertex kit pictures, use search as I don't have it with me. You can definately call Speed alliance and ask for Jacob in Virginia waiting for sc300 ridge kit, hopefully that verifies it. Oh btw, it comes with canards too
brand new GE block
w58 transmission, r154 pic can be taken.
New tails (stock 92s come with car)
GTE internals
and ofcourse I have all stock fenders, bumper, headlights etc.
GTE engine pictures will be taken only for serious buyer, as the head and wiring etc are boxed up.
Vertex kit pictures, use search as I don't have it with me. You can definately call Speed alliance and ask for Jacob in Virginia waiting for sc300 ridge kit, hopefully that verifies it. Oh btw, it comes with canards too
Trending Topics
#14
Rookie
Thread Starter
Join Date: Aug 2006
Location: VA
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
it's weird how my roomate jumped on this. I am currently building the car for him, so this car won't go trashed. Luckily we are doing GTE swap in there but he doesnt want the widebody, so I may have to keep it for later on.
I will let you guys know, but for now, thread should get locked. Thanks for interests
If interested, Ill snap some pix of the motor build
I will let you guys know, but for now, thread should get locked. Thanks for interests
If interested, Ill snap some pix of the motor build
Thread
Thread Starter
Forum
Replies
Last Post