FS - 98 GS400, with MODs
#1
Pole Position
Thread Starter
Join Date: Mar 2002
Location: Pennsylvania
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
FS - 98 GS400, with MODs
Starting your own business requires some sacrifices, and this is the latest.
Selling for $14,800. I am looking to sell as is first. I May part out if there are no takers as is.
Black with tan interior, 154K miles on Mobil 1 Syn
Navigation, HIDs, everything else that a GS4 has
L-Tuned 18 inch wheels, staggered with Michelin Pilot Sports 235 and 265's
Eibach Pro Kit / Bilstein Sports
L-Tuned steering ECU
TRD Blue swaybars
TRD STB up front
TRD lower chassis brace up front
Toms STB in rear
Toms 6 pc suspension kit in rear
TRD Grille
LSD w/3.76 gears from 95 Supra Turbo
SRT Intake with ECU chip
Hayden Transmission Cooler
Brembo slotted rotors with ProACT Cermic pads
Stock exhaust with straight 2.5" center sections (no resonators)
Full Disclosure section -
A/C died last week. WIl cost $1700 to replace compressor, etc.
Windshield has three rock chips in it, passed inspection with it, they are tiny.
Needs O2 sensor on front left bank to rid intermittent CEL problem, should replace pair
Will need timimg belt at 200K
Rock chips from NJ turnpike on front bumper and hood
1 door ding from mall, minor, very small.
Piping on drivers seat cracked in a few places
Located in 18940 zip.
Cell phone for serious buyers only 215-208-6557
Dan
PS - Pics coming later, leaving for weekend tomorrow, will be back Sunday, no PC til then
Selling for $14,800. I am looking to sell as is first. I May part out if there are no takers as is.
Black with tan interior, 154K miles on Mobil 1 Syn
Navigation, HIDs, everything else that a GS4 has
L-Tuned 18 inch wheels, staggered with Michelin Pilot Sports 235 and 265's
Eibach Pro Kit / Bilstein Sports
L-Tuned steering ECU
TRD Blue swaybars
TRD STB up front
TRD lower chassis brace up front
Toms STB in rear
Toms 6 pc suspension kit in rear
TRD Grille
LSD w/3.76 gears from 95 Supra Turbo
SRT Intake with ECU chip
Hayden Transmission Cooler
Brembo slotted rotors with ProACT Cermic pads
Stock exhaust with straight 2.5" center sections (no resonators)
Full Disclosure section -
A/C died last week. WIl cost $1700 to replace compressor, etc.
Windshield has three rock chips in it, passed inspection with it, they are tiny.
Needs O2 sensor on front left bank to rid intermittent CEL problem, should replace pair
Will need timimg belt at 200K
Rock chips from NJ turnpike on front bumper and hood
1 door ding from mall, minor, very small.
Piping on drivers seat cracked in a few places
Located in 18940 zip.
Cell phone for serious buyers only 215-208-6557
Dan
PS - Pics coming later, leaving for weekend tomorrow, will be back Sunday, no PC til then
Last edited by nudderGS400; 07-17-05 at 12:20 PM. Reason: Added pics
#4
Pole Position
Thread Starter
Join Date: Mar 2002
Location: Pennsylvania
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
I dunno
That's a tough question.
I am not capable of reversing all the mods myself, and it seems the cost of reversing a lot of them may be prohibitively expensive. At least judging from what it cost to have them put on. The other problem is since I don't have a lot of the original parts, I would only be able to swap (LSD, sways, LCB, Grill) with local folks (their stock parts for my mods).
I guess another way of asking the question is, what would be a 'fair' offer for the car with the mods?
I am not capable of reversing all the mods myself, and it seems the cost of reversing a lot of them may be prohibitively expensive. At least judging from what it cost to have them put on. The other problem is since I don't have a lot of the original parts, I would only be able to swap (LSD, sways, LCB, Grill) with local folks (their stock parts for my mods).
I guess another way of asking the question is, what would be a 'fair' offer for the car with the mods?
Last edited by nudderGS400; 07-17-05 at 09:10 PM. Reason: Added pic
#6
Pole Position
Thread Starter
Join Date: Mar 2002
Location: Pennsylvania
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
No interest?
Looking for input on sale.....
I have orded the AC parts, will be fixed in a week or two. Ordered O2 sensors too.
With these two issues fixed, is $14,000 too high?
Maybe it's me, but with over $3 grand in mods, it seems fair!?
Dan
I have orded the AC parts, will be fixed in a week or two. Ordered O2 sensors too.
With these two issues fixed, is $14,000 too high?
Maybe it's me, but with over $3 grand in mods, it seems fair!?
Dan
#7
Driver
iTrader: (2)
Originally Posted by nudderGS400
Looking for input on sale.....
I have orded the AC parts, will be fixed in a week or two. Ordered O2 sensors too.
With these two issues fixed, is $14,000 too high?
Maybe it's me, but with over $3 grand in mods, it seems fair!?
Dan
I have orded the AC parts, will be fixed in a week or two. Ordered O2 sensors too.
With these two issues fixed, is $14,000 too high?
Maybe it's me, but with over $3 grand in mods, it seems fair!?
Dan
<-----searching for a GS
Trending Topics
#9
Pole Position
Thread Starter
Join Date: Mar 2002
Location: Pennsylvania
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
Last chance - 98 GS400, $9,900
I am about to trade it in as is. Thought I would offer it to the group first.
The wheels have been sold. Running on stock 16s with Pirelli WIntersports now. Great tires in snow, especially with LSD.
Everything else is as noted above, mleage is now at 163K.
PM or call cell 215-208-6557 to make an offer.
$9,900 OBO!!!!!!!
The wheels have been sold. Running on stock 16s with Pirelli WIntersports now. Great tires in snow, especially with LSD.
Everything else is as noted above, mleage is now at 163K.
PM or call cell 215-208-6557 to make an offer.
$9,900 OBO!!!!!!!
Last edited by nudderGS400; 01-18-06 at 03:47 PM. Reason: Price Drop
#11
Pole Position
Thread Starter
Join Date: Mar 2002
Location: Pennsylvania
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
LAST Last Chance - $8,500
All PMs returned.
$8,500 seems pretty fair to me. Needs tires cause it now has 176K on it.
Comes with manuals, two O2 sensors(NIB), ceramic pads for rear (NIB).
Parked in garage. Need to drop off at dealer or sell (and get money) before next weekend.
PM or call on cell 215-208-6557.
Dan
$8,500 seems pretty fair to me. Needs tires cause it now has 176K on it.
Comes with manuals, two O2 sensors(NIB), ceramic pads for rear (NIB).
Parked in garage. Need to drop off at dealer or sell (and get money) before next weekend.
PM or call on cell 215-208-6557.
Dan
#13
Pole Position
Thread Starter
Join Date: Mar 2002
Location: Pennsylvania
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
PM sent.
Compressor was replaced, condensor needs to be replaced now.
O2 sensors are in 'new in the box' in the trunk, but the CEL hasn't come on for months and I am hesitant to take the time to bring it into the shop if I don't need to.
Still runs well!
Compressor was replaced, condensor needs to be replaced now.
O2 sensors are in 'new in the box' in the trunk, but the CEL hasn't come on for months and I am hesitant to take the time to bring it into the shop if I don't need to.
Still runs well!
Thread
Thread Starter
Forum
Replies
Last Post
cwerlin
2Gen GS430 / 400/ 300 Classifieds (98-05)
5
08-18-03 11:27 AM