Largest and best reasonable speakers that fit without major mods.
03-31-15, 01:26 PM
#31
Alright... If this were my car and I was trying to do a decent sq build on a budget here is what I'd do....
http://www.alpine-usa.com/product/view/cde-hd149bt
http://www.arcaudio.com/p/xdi-1200-6?pp=24
https://www.parts-express.com/dayton...4-ohm--295-375
3 8" subwoofers- one in the factory location- 2 in the factory speaker locations giving you roughly the cone are of a single 12 and being that it's in the cabin that should do the trick just fine
https://www.madisoundspeakerstore.co...-dome-tweeter/
Thats how I'd do it :-)
Ill post more in a bit If I had to find a way to use the stuff you have...
http://www.alpine-usa.com/product/view/cde-hd149bt
http://www.arcaudio.com/p/xdi-1200-6?pp=24
https://www.parts-express.com/dayton...4-ohm--295-375
3 8" subwoofers- one in the factory location- 2 in the factory speaker locations giving you roughly the cone are of a single 12 and being that it's in the cabin that should do the trick just fine
https://www.madisoundspeakerstore.co...-dome-tweeter/
Thats how I'd do it :-)
Ill post more in a bit If I had to find a way to use the stuff you have...
Thank You! Please do!!
03-31-15, 01:56 PM
#32
Turbo5upra, why not two 8s and a 10" in the stock location? By going that route, I'm thinking you could actually downsize the two 8s to 6" (for similar impact) and hardly have to modify anything on the parcel shelf, other than reinforcing it.
I used a Dayton driver from P-E to build my 18" home subwoofer and have been very happy with it.
I used a Dayton driver from P-E to build my 18" home subwoofer and have been very happy with it.
Thread
Thread Starter
Forum
Replies
Last Post
pnyboy27
Lexus Audio, Video, Security & Electronics
8
02-19-08 09:15 PM
bigiedon
Lexus Audio, Video, Security & Electronics
5
10-17-06 05:28 PM