help... (installing double din)
#21
Driver
Join Date: Oct 2008
Location: Jacksonville, FL
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
#22
Lexus Test Driver
i know for a fact metra makes a double din kit for the sc3/4 i just ordered a single din kit for my car the actual putting the unit it won't be the hard part..its the wiring thats going to suck.
#23
Lead Lap
iTrader: (2)
Join Date: Jul 2005
Location: NORCAL
Posts: 407
Likes: 0
Received 0 Likes
on
0 Posts
Wiring is not bad at all... here are the steps.
Remove pass side running board and kick pane
remove rear seat cushion by lifting up
remove 3 10mm to remove upper seat portion
remove the pass side trunk trim
remove cd changer
remove factory amp and disconnect
take the output side plug cut off the end.
using "speed wire" u can purchase from ur local audio shop or bestbuy hook up the wire from the amp to the speed wire and run that up to the radio cavity and continue wiring ur radio as usual. power/switched/ground/power antenna can all be grabbed from the radio cavity.
Remove pass side running board and kick pane
remove rear seat cushion by lifting up
remove 3 10mm to remove upper seat portion
remove the pass side trunk trim
remove cd changer
remove factory amp and disconnect
take the output side plug cut off the end.
using "speed wire" u can purchase from ur local audio shop or bestbuy hook up the wire from the amp to the speed wire and run that up to the radio cavity and continue wiring ur radio as usual. power/switched/ground/power antenna can all be grabbed from the radio cavity.
Thread
Thread Starter
Forum
Replies
Last Post