Speaker Install SC430
#46
Good positive reviews. The only 8-ohm rated 6x9 they carry. Has anyone installed this?
http://www.parts-express.com/pe/psho...37&ctab=2#Tabs
http://www.parts-express.com/pe/psho...37&ctab=2#Tabs
If you try these... make sure to let us know how they work out
#47
Driver School Candidate
Join Date: Mar 2008
Location: tx
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
thank you zgone for writeup, i ordered a pair of 6 1/2 to replace the front 6*9. can't wait for them...
i ordered the following, hope they sound good. i'm looking for more bass:
Pioneer C16LU20-51F 6-1/2" Woofer
i ordered the following, hope they sound good. i'm looking for more bass:
Pioneer C16LU20-51F 6-1/2" Woofer
#48
Driver School Candidate
Join Date: Apr 2008
Location: Texas
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Good positive reviews. The only 8-ohm rated 6x9 they carry. Has anyone installed this?
http://www.parts-express.com/pe/psho...37&ctab=2#Tabs
http://www.parts-express.com/pe/psho...37&ctab=2#Tabs
#49
Moderator - Electronics Forum
You could always make yourself a spacer ring. That should pop the magnet up enough to clear the window.
And now you found out first hand on how junky the ML speakers really are!
And now you found out first hand on how junky the ML speakers really are!
#50
Just finished the amp, sub and rear drivers upgrade
I just completed the install of the new subwoofer, amp and rear drivers last night. All three were dried out (blown?) in our '02 SC. I had upgraded the front woofers this summer and I guess the back speakers couldn't handle the extra volume since the fronts sounded so good.
This is not a minor undertaking. Total time for the install is about 16 hours or so. You probably could do it in 10-12 if you were a veteran stereo guy and weren't worried about the fit/finish as I was. I followed the directions from ZGone to a tee. They are spot on.
The sound is outstanding now with all of the speakers finally working and the sub having some punch with the new amp. Need to do some tuning of the amp/sub after a few hours of break in.
If you have an older SC chances are pretty good you have some blown/dried out speakers. It's worth every penny and second of time to do this upgrade.
This is not a minor undertaking. Total time for the install is about 16 hours or so. You probably could do it in 10-12 if you were a veteran stereo guy and weren't worried about the fit/finish as I was. I followed the directions from ZGone to a tee. They are spot on.
The sound is outstanding now with all of the speakers finally working and the sub having some punch with the new amp. Need to do some tuning of the amp/sub after a few hours of break in.
If you have an older SC chances are pretty good you have some blown/dried out speakers. It's worth every penny and second of time to do this upgrade.
Last edited by tfeni52355; 02-02-10 at 04:58 PM.
#51
Driver School Candidate
Join Date: Jan 2010
Location: SC
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
SC 430 Door woofers
First, I want to thank GZone for the great article.
I just removed my passanger door panel in out a half hour following his advice. The hardest part was removing the switch panal in the door. Once I figured that out, it was easy.
I have already ordered 2 Eminence ALPHA 6A 6" Mid Range Speaker 100 Watt 8 Ohm and I also found 6x9 to 6.5" speaker adaptors for the SC 430 on e-bay. When they arrive I'll let you know how they work.
Needless to say my speaker was also blown so I will replace both.
I just removed my passanger door panel in out a half hour following his advice. The hardest part was removing the switch panal in the door. Once I figured that out, it was easy.
I have already ordered 2 Eminence ALPHA 6A 6" Mid Range Speaker 100 Watt 8 Ohm and I also found 6x9 to 6.5" speaker adaptors for the SC 430 on e-bay. When they arrive I'll let you know how they work.
Needless to say my speaker was also blown so I will replace both.
#52
Just a bit of semantics, but these speakers that have their surroundings deteriorating are not "blown". A blown or "fried" speaker is one where the voice coil is heated up (by being overpowerd) and melts (hence the term fried) so that the cone can no longer freely move air. Blown speakers cannot be repaird (or at least cost more to fix than to replace). These speakers that are deterioarating at the surroundings would fall apart this way even if they were never played. They just deteriorate over time naturally due to the elements of the weather.
But anyway, these stock speakers suck in everyway possible and are WAY over priced!
But anyway, these stock speakers suck in everyway possible and are WAY over priced!
#54
Driver School Candidate
Join Date: Jan 2010
Location: SC
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Speaker and Adaptors
I replaced the 6x9 door speakers with Eminence Alpha 6A 6" speakers and 6x9 to 6" speaker adaptors I got from "mjmautoinnovations" on e-bay. The adaptors are specific for the SC430 and worked GREAT and at a price that I couldn't make them myself. The speakers fit without any window problems. I replaced the second door speaker in less than 30 minutes once I had the first door done.
#57
Driver School Candidate
Join Date: Feb 2010
Location: Texas
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
wanted to thank all the SC430 lovers for all the valuable information about how to solve the issue with the bad factory 6x9 speakers on these cars. I was able to replace mine with a pair of Alpine SPS-609. these speakers are not the top of the line but they do give a top of the line sound. I am satisfied with the results.
thanks again for all the info.
Martin
thanks again for all the info.
Martin
#58
Lexus Test Driver
wanted to thank all the SC430 lovers for all the valuable information about how to solve the issue with the bad factory 6x9 speakers on these cars. I was able to replace mine with a pair of Alpine SPS-609. these speakers are not the top of the line but they do give a top of the line sound. I am satisfied with the results.
thanks again for all the info.
Martin
thanks again for all the info.
Martin
#59
Driver School Candidate
Join Date: Feb 2010
Location: Texas
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
so far all i have noticed is a much more improved sound quality. Am not the type that turns the volume high to bust me ear membranes, i turn it load enough to get a goos music sound, Love it so far.
#60
Lexus Test Driver
I finished my installation last night for the two front speakers. I used 6-1/2" Jamo speakers, $9 each from Paarts-Express. This is a Swedish made speaker who 15-20 years ago tried to compete with Bose by offering lineups against the Accoustimass. Good sounding but never really gained ground due to lack of name recognition.
Here's the speaker
Sound is very good quality. Tight bass and sound can be loud when cranked up. The thud thud thud of the bass can be felt strongly when your arm is resting on door armrest.
Some notes on installation:
1. The plastic garnish on the door window switch cluster breaks *very easily*. I snapped the plastic on both Left and Right. I think my screw driver is too thick for the job. One might be better off using a butter knife. It can also break when installing so be really careful. I will post picture later. Brand new, the part costs around $300 on the driver side and $85 on the passenger side.
2. The replacement can be made without completely removing the door panel. After removing all the screws and tabs, lift below and raise the panel enough to remove the speaker mount/holder (4 brass screws using socket #10). All work is done outside anyway (except if you are adding EDead).
3. The MDF seems too thick as an adapter. If you look inside the panel cavity before removing the speakers, there's only about 1/4" to 1/3" clearance between the speaker and the door speaker plastic grill. One may use a 1/4" birch or oak plywood. Make sure you use GE Silicone II or similar when assembling the speaker to the plastic speaker mount/holder to close air gaps.
Thank you Zgone for your post and all the others who installed ahead of me.
Here's the speaker
Sound is very good quality. Tight bass and sound can be loud when cranked up. The thud thud thud of the bass can be felt strongly when your arm is resting on door armrest.
Some notes on installation:
1. The plastic garnish on the door window switch cluster breaks *very easily*. I snapped the plastic on both Left and Right. I think my screw driver is too thick for the job. One might be better off using a butter knife. It can also break when installing so be really careful. I will post picture later. Brand new, the part costs around $300 on the driver side and $85 on the passenger side.
2. The replacement can be made without completely removing the door panel. After removing all the screws and tabs, lift below and raise the panel enough to remove the speaker mount/holder (4 brass screws using socket #10). All work is done outside anyway (except if you are adding EDead).
3. The MDF seems too thick as an adapter. If you look inside the panel cavity before removing the speakers, there's only about 1/4" to 1/3" clearance between the speaker and the door speaker plastic grill. One may use a 1/4" birch or oak plywood. Make sure you use GE Silicone II or similar when assembling the speaker to the plastic speaker mount/holder to close air gaps.
Thank you Zgone for your post and all the others who installed ahead of me.