how to install aftermarket radio in 2nd generation gs
#4
Pole Position
Thread Starter
Join Date: Sep 2006
Location: fl
Posts: 388
Likes: 0
Received 0 Likes
on
0 Posts
black left rear (pos+)............yellow left rear (neg-)...........red right rear (pos+) .............white right rear (neg-) ................light green/red sub (neg-)...........light green/black sub (pos+)
Last edited by dusouth; 12-08-08 at 07:43 PM.
#5
Pole Position
Thread Starter
Join Date: Sep 2006
Location: fl
Posts: 388
Likes: 0
Received 0 Likes
on
0 Posts
front right (pos+).... light green................front right (neg -)..............blue (not the blue with yellow line).............front left(pos+) ...pink..................front left(neg-)............purple
Last edited by dusouth; 12-08-08 at 07:49 PM.
#6
Pole Position
Thread Starter
Join Date: Sep 2006
Location: fl
Posts: 388
Likes: 0
Received 0 Likes
on
0 Posts
use the 6 pin connection to get power behind the radio and ground to the car. don't use the 10 pin harness
the RED ACC wire connects to the grey wire
the YELLOW 12V wire conncets with the blue wire with the yellow stripe
the RED ACC wire connects to the grey wire
the YELLOW 12V wire conncets with the blue wire with the yellow stripe
Last edited by dusouth; 12-08-08 at 07:53 PM.