Kupo

so far i found 4 rear camber adjusters but have not found any front camber kits. anyone know of anybody who has them? or is the car just too new? please let me know if im missing any other brands that have available camber kits. still trying to shop around.

Front
??????

Rear
Megan Racing
http://www.meganracing.com/product_d...=1940&catid=91
http://www.meganracing.com/product_d...=1938&catid=91
SPC
http://www.spcalignment.com/index.ph...c&task=details
http://www.spcalignment.com/componen...AFrom&to=USATo
FIGS
http://shopfigs.com/v1/index.php?rou...product_id=280

Dmance

tdemand has them. but their pricey and you have to find someone who can get them. i have the rears prolly gonna get the fronts later.

Kupo

dang those are the only options right now? super expensive

Dmance

as far as i know yes.

Mr_VFS1

I'm getting mine installed today. I got the SPC ones. Check out their thread in the vendor section. They will hook you up.

Dmance

http://www.t-demand.jp/products/proarm_l04.html

the only front arms currently. i believe there was another company i saw a little while ago but i cant remember there name.

breezytint

My friend and I just installed both rear camber arms from Dominant Engineering (2 piece each side). Install was easy and works realy well.....can have up to 7 degrees of camber

I was lucky that I didn't need camber up front due to the offset of my rims, but my friend just ordered the T-Demand FUCA and should be getting them soon.

Thanks to Dmance for the lead on the T-Demand

Silec

iTrader: (10)

I am about 95% positive that you can use 2is front camber kits for the 3is since they are of the same/similar design

VMRWheels

I've used Dominant Arms in the past. Great stuff! Though, there may or may not be a turnaround time.

Have you tried contacting any eBay resellers or other Megan Racing dealers? I'm sure they can offer more competitive pricing than those listed on the direct Megan site.

breezytint

No, the 2IS front camber kit will not fit the 3IS. We've contacted Megan Racing already and they confirmed it will not fit.

breezytint

T-Demand FUCA just came in.....we will be installing them to my buddy's ride next wkend.

Rear camber arms from Dominant Engineering has already been installed....

Silec

iTrader: (10)

spc ball joint?

ExSrAaron

^I just pm'd a vendor this week, SPC ball joints do not came in 3IS fitment yet

dnasians

iTrader: (4)

the 4gs parts should fit the 3is parts...

at least the rears do as seen here
http://shopfigs.com/v1/index.php?rou...product_id=282

anthonys2r

iTrader: (1)

Also waiting for front camber kit, any confirmed (and reasonably priced) kits in existence?