daobn24

For the product, just search for ADS-ALCA and ADS-USB on eBay.

I just don't know where to start with the installation...

specONE

iTrader: (3)

Question for you. When you remote start and you unlock the car after, does the remotestart shut off like factory RSE ? Or does it keep running?
I know DEI/Xpresskits way of doing is to do it same as factory Remote Start, I wonder if this system keeps the car running.

janterry15

Can you give us the the sources of information you used to wire this?

like the wire diagrams etc

thanks

tbone587

Yes when you open the door the car shuts off. There is no "secure takeover" procedure

cheuhpeuhh

this is awesome! way to go!

Kuzyn

Did it come with instructions specific to your car ? I would like to install it on a 06 IS350 would the instructions be specific to my year and model ?

Da0ne

Good finally I can have remote start I wonder if the dealership will find out when I return the car

I did the same process for my 13 fusion and it only required 5 wires all under the dash

specONE

iTrader: (3)

thank you tbone587 for confirming. i'll wait til DEI/Xpresskits has firmware then since I have their hardware sitting and waiting. friend at DEI states they are working on firmware currently also but nothing in Alpha form yet.


For idatalink,
here is some links to product
http://idatalink.com/firmware/firmwa...hicle_id/11652

and the manual to look over
http://cdncontent2.idatalink.com/cor...N_20141104.pdf

I probably dont recommend it to anybody to install it themselves if you are not comfortable with electronics in the vehicle. These vehicles have too many computers nowadays for you to be randomly connecting wires with only a guide not knowing what you are doing and then end up having a car that cannot start if you mess up

itsjdmyo

Thank you specONE for all that info. I am pretty familiar with alarm installs but that ADS-ALCA manual looks intense! :/ But nonetheless, it looks like we are getting movement on having remote start on 2014s with navi!

tbone587

You posted the wrong install guide. You need the guide for the RS firmware

itsjdmyo

Hey tbone587,

Did you only need to install the RS firmware and not the DL-TL7? Or did you have to flash both? Thanks!

tbone587

The RS firmware is designed to make the module act as a standalone remote start with factory key integration. The DL firmware is designed when you are using the module in conjunction with an external remote start unit such as a smart phone unit. You flash it to one or the other depending on how you will install it.

xbigboix83

Does anyone know who can install this product?

IS3F

+1 - looking for an installer in the Toronto area

specONE

iTrader: (3)

Sorry you're right. in my setup i'm going to do is added aftermarket along to tie in with the factory thats why I myself was looking at the DL manual instead. wire connection should be pretty close to the same.

Here is link to RS guide for anyone only doing standalone
http://cdncontent2.idatalink.com/corporate/Content/Manuals/RS-TL7/OEM-AL(RS)-TL7-[ADS-ALCA]-EN_20141104.pdf