Hardwiring a radar detector
#1
Driver School Candidate
Thread Starter
Join Date: Aug 2007
Location: Texas
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Hardwiring a radar detector
I've been searching on the forum and haven't found anything conclusive. I pulled down the overhead console and there are two harnesses but nothing like this link https://www.clublexus.com/forums/is-...ew-mirror.html. I was wondering if you guys could help me out. Thanks.
#6
Driver School Candidate
Thread Starter
Join Date: Aug 2007
Location: Texas
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
That makes sense. I'm hoping that someone has or can find the diagram. I have my V1 on a visor clip on the visor. That is why I want to use the overhead console.
#7
Lead Lap
iTrader: (5)
Get a mirrortap from link below then tap blue wire (ignition power) and purple (ground) it's right from blue wire.
http://www.mirrortap.com/mt2000.html#Micro
Pin 1 (Blue): Ignition Power
Pin 2 (Puple): Ground
Pin 3 (not on ewd?)
Pin 4 (Green): Signal for light control
Pin 5 (White): Signal for light control (both are MPX)
Pin 6 (Pink): Power
Pin 1 is fused with the 10A IG1 NO.3 fuse
Pin 6 is fused with the 10A MPX-B NO.1 fuse
http://www.mirrortap.com/mt2000.html#Micro
Pin 1 (Blue): Ignition Power
Pin 2 (Puple): Ground
Pin 3 (not on ewd?)
Pin 4 (Green): Signal for light control
Pin 5 (White): Signal for light control (both are MPX)
Pin 6 (Pink): Power
Pin 1 is fused with the 10A IG1 NO.3 fuse
Pin 6 is fused with the 10A MPX-B NO.1 fuse
Trending Topics
#8
Driver School Candidate
Thread Starter
Join Date: Aug 2007
Location: Texas
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Get a mirrortap from link below then tap blue wire (ignition power) and purple (ground) it's right from blue wire.
http://www.mirrortap.com/mt2000.html#Micro
Pin 1 (Blue): Ignition Power
Pin 2 (Puple): Ground
Pin 3 (not on ewd?)
Pin 4 (Green): Signal for light control
Pin 5 (White): Signal for light control (both are MPX)
Pin 6 (Pink): Power
Pin 1 is fused with the 10A IG1 NO.3 fuse
Pin 6 is fused with the 10A MPX-B NO.1 fuse
http://www.mirrortap.com/mt2000.html#Micro
Pin 1 (Blue): Ignition Power
Pin 2 (Puple): Ground
Pin 3 (not on ewd?)
Pin 4 (Green): Signal for light control
Pin 5 (White): Signal for light control (both are MPX)
Pin 6 (Pink): Power
Pin 1 is fused with the 10A IG1 NO.3 fuse
Pin 6 is fused with the 10A MPX-B NO.1 fuse
#10
Driver School Candidate
Thread Starter
Join Date: Aug 2007
Location: Texas
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
#11
Lead Lap
iTrader: (5)
#12
Driver School Candidate
Thread Starter
Join Date: Aug 2007
Location: Texas
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
There's a cover in front of mirror on the glass. It looks like this. Remove the cover by sliding down on the cover, you can see the wire harness slightly. You can then pull off the cover after sliding down this cover. Ignore the other wire on the outside. It's my dash cam wire.
#13
Lexus Fanatic
Since you're right next-door in NC, I thought I'd pass along the tip that the use of a detector is illegal in adjacent VA....though you may have one in your car if it is turned off. The state troopers have detector-detectors.....and can tell when you are using one. If so, they have the right to stop and search....confirmed by the courts. Penalties include a fine and/or impoundment of the device. No warnings. No excuses.
#14
Driver School Candidate
Thread Starter
Join Date: Aug 2007
Location: Texas
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Since you're right next-door in NC, I thought I'd pass along the tip that the use of a detector is illegal in adjacent VA....though you may have one in your car if it is turned off. The state troopers have detector-detectors.....and can tell when you are are using one. If so, they have the right to stop and search....confirmed by the courts. Penalties include a fine and/or impoundment of the device. No warnings. No excuses.
#15
Lexus Fanatic