Help needed - Rear camera part number
10-26-14, 12:13 PM
#17
Rookie
Join Date: Feb 2014
Location: Italy
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Hole for that camera is really big... 22mm... Why don't you choose another type, maybe this one:
http://www.lightinthebox.com/it/120-...timately_buy_8
The size of the camera is about the same but this one is like the one in the guide (with a small hole). I'm afraid about the sealing...
http://www.lightinthebox.com/it/120-...timately_buy_8
The size of the camera is about the same but this one is like the one in the guide (with a small hole). I'm afraid about the sealing...
01-17-15, 12:14 PM
#18
Rookie
Join Date: Feb 2014
Location: Italy
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Do you have the exact drilling location? And did you follow exactly all the instructions posted in the previous page (including removing the license plate and rear lights)? Isn't it possible to drill the hole in the overlay directly on the car without dismount everything?
01-19-15, 12:59 AM
#19
Driver School Candidate
Join Date: Oct 2014
Location: state
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
I finally bought the rearview camera, THIS ONE.
Do you have the exact drilling location? And did you follow exactly all the instructions posted in the previous page (including removing the license plate and rear lights)? Isn't it possible to drill the hole in the overlay directly on the car without dismount everything?
Do you have the exact drilling location? And did you follow exactly all the instructions posted in the previous page (including removing the license plate and rear lights)? Isn't it possible to drill the hole in the overlay directly on the car without dismount everything?
You have to follow the instructions, I made one a hole in the overlay only and routed the cable via a hole behind the light unit.
01-19-15, 04:28 AM
#20
Rookie
Join Date: Feb 2014
Location: Italy
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
+6V & -6V are not the same as ground & +12Vdc?
My camera is 12V...Otherwise I'll connect the power supply to the reverse gear light and not to that connector, and use this one just for the video in
Last edited by leoben; 01-19-15 at 04:34 AM.
04-24-19, 04:50 AM
#21
Driver School Candidate
Join Date: Apr 2019
Location: Wu
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
[QUOTE=inventcar;8702927]Rear camera for Lexus IS 3 (250, 300, 300h from 04.2013 year production)http://inventcar.ru/kamera-toyota-lexus[/QUOTE)
Do You have this instruction as this link is not valid any note .. brgds
Do You have this instruction as this link is not valid any note .. brgds
04-24-19, 05:10 AM
#22
Driver School Candidate
Join Date: Apr 2019
Location: Wu
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
I installed this one:
http://www.lightinthebox.com/new-arr..._p1017767.html
Connect it to the connector in the trunk:
pin 1: +6v
pin 2: +video
pin 3: -video
pin 4: -6v
pin 5: not connected
Follow this instructions:
https://translate.google.nl/translat...mis3&sandbox=1
http://www.lightinthebox.com/new-arr..._p1017767.html
Connect it to the connector in the trunk:
pin 1: +6v
pin 2: +video
pin 3: -video
pin 4: -6v
pin 5: not connected
Follow this instructions:
https://translate.google.nl/translat...mis3&sandbox=1
Thread
Thread Starter
Forum
Replies
Last Post
1koolfella
RX - 2nd Gen (2004-2009)
0
02-27-13 09:27 PM
DaveGS4
Lexus Audio, Video, Security & Electronics
9
05-28-04 09:53 AM
