CobraGSF

iTrader: (2)

so heres my situation, my dealership had already drilled holes in my spindle grill before i even started negotiating for my car. I didnt special order it, i just went to the dealership and it was there. I figured i could live with the front plate, but i want to try something new. heres what i was considering doing,

The license plate bracket made 4 holes in the grill . so my plan was to put back the screws and put black screw caps over them and hopefully they will blend in with the grill a little.

Then i was planning on using black zipties and using that to attach my front plate to the grill, because i dont want to chance going without it because NY requires it and i was chosen to stop at a random stop the other day. Officer gave my friend a ticket for not having a plate, dont need that headache.

I would opt for the grimmspeed relocation, but honestly not a fan of how it looks.

Anyone else have any ideas or suggestions? thanks

nayuta

Honestly, if your grille is already drilled for the front plate I would just use that instead of using zip ties. The holes are there already so just use the front plate to cover them.

I would use bumper plugs or black screws only if I was going for the offset look with the Grimmspeed.

CobraGSF

iTrader: (2)

Sorry, forgot to mention i do plan to go with an offset look when putting the plate back on with the zip ties

nvbirdman

In my state we are not required to have a front plate, but I wanted to mount something else so I used two of the butterfly type hollow wall fasteners. They slip through the grill openings then open up to secure what I wanted to mount, and before I used them, I checked to be sure I could remove them and not have them fall down between the grill and radiator.

Randre19

Anyone know where we can get bumper plugs for the holes in the grill? For those of us who had the plate drilled into the bumper.