Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Exterior Guides
- How to Install Black Pearl Style Emblems
Step by step instructions for do-it-yourself repairs
Browse all: Exterior Guides
Black pearl emblems installed
#1
Driver
Thread Starter
Black pearl emblems installed
kk so after plastidipping my original emblems i didn't like that flat and dull look. Kinda made the car look cheap so i went with the black pearl and now it looks legit. I used the heat gun method to remove the emblems. They came off real easy in less than couple minutes. Also used painters tape to align the letters before removing them. Here are some pictures of the black pearl
#4
Lexus Champion
Seriously, does anything not look fantastic with Atomic Silver? Well done!
The following users liked this post:
FSporting (04-10-22)
#5
Driver
Thread Starter
thank you sir
hahah thanks and no, nothing really. atomic silver can match anything lol
#7
Driver
Thread Starter
Trending Topics
#10
Looks absolutely great, atomic; thanks for the additional pictures!
I know you got yours from a friend, atomic, but when posting, if everyone can please post where they got their emblems from, it'd be great!
I know you got yours from a friend, atomic, but when posting, if everyone can please post where they got their emblems from, it'd be great!
#14
Driver
Thread Starter
thanks guys. i couldn't resist and had the car tinted today and it looks pretty good. It definitely brings the black pearl out more
Front emblem was the easiest of them all. It's held on by some sort of circlips which id like to call jesus clips. But once you can squeeze a thin-enough pocket screwdriver or knife between the clip and the mounting point, you can work them around and they will come off easy. After removing the clips, there's tab at the bottom of the emblem you have to push. The front took me about 5 mins.
Front emblem was the easiest of them all. It's held on by some sort of circlips which id like to call jesus clips. But once you can squeeze a thin-enough pocket screwdriver or knife between the clip and the mounting point, you can work them around and they will come off easy. After removing the clips, there's tab at the bottom of the emblem you have to push. The front took me about 5 mins.
#15
Lead Lap
Join Date: May 2011
Location: Los Angeles, CA
Posts: 548
Likes: 0
Received 0 Likes
on
0 Posts
thanks guys. i couldn't resist and had the car tinted today and it looks pretty good. It definitely brings the black pearl out more
Front emblem was the easiest of them all. It's held on by some sort of circlips which id like to call jesus clips. But once you can squeeze a thin-enough pocket screwdriver or knife between the clip and the mounting point, you can work them around and they will come off easy. After removing the clips, there's tab at the bottom of the emblem you have to push. The front took me about 5 mins.
Front emblem was the easiest of them all. It's held on by some sort of circlips which id like to call jesus clips. But once you can squeeze a thin-enough pocket screwdriver or knife between the clip and the mounting point, you can work them around and they will come off easy. After removing the clips, there's tab at the bottom of the emblem you have to push. The front took me about 5 mins.