07awdis250

iTrader: (1)

Hello ClubLexus,

I finally received my BC coilovers and I'm ready for install this weekend . .

I want to run VARRSTOEN ES332 and the specs are 19X9.5 & 19x10.5 +22 all around . I want to know if I will be able to run these aggressive specs. I'm not going to slam the car to much. I will loweer the car at most 2".

what tires ?
what fender mods ?
camber arms?

I hope anyone that really knows can help me out answer these questions becauseI don't want to buy a set of wheels that I cant use.

RayG

iTrader: (3)

if your not slamming it i would run 235/35/19 and 265/30/19 its going to stick out a lot since your not slammed. Also this is for your 3is ? how did you get bc coils spoke with tim from bc and believe they aren't out yet

07awdis250

iTrader: (1)

I already have (2) brand new Nitto 555 (235/35/19 ) which I'm planning to run in the front . Now , can I run 245/35/19 on the back so they can stretch a little ? if I run 265/30/19 how bad will it stick out ?

Contact bc directly or you can buyt them from ebay .
http://www.ebay.com/itm/2014-2015-Lexus-IS250-IS350-RWD-BC-Racing-BR-Series-Coilovers-Lowering-Coils-Set-/190999015821?pt=Motors_Car_Truck_Parts_Accessories&fits=Make%3ALexus%7CModel%3AIS250%7CYear%3A2014&hash=item2c786db18d&vxp=mtr

RayG

iTrader: (3)

it will stick out because the offset heres mine running a falken 453 235/35/19 and a 265/30/19 19x9 +35 19x10.5 +45

UncleSpud

Ray, what's the ride quality like with your new set up?

RayG

iTrader: (3)

honestly rides better than with the stock tires. feels very smooth and quite waiting on my j% coil overs to come in this week then i will be updating my thread

350speed

Hi guys,

I just purchased the 2014 IS250 F-sport for my wife and was wondering what's the spec on stock 18" wheels.

Thanks.

bucanero

http://is.sewellparts.com/accessorie...2014/6287.html

juvi22003

iTrader: (2)

Those are the specs i usually run on my 2IS all the time but its too aggressive for the 3IS, its still possible but would need to run smaller tires like 215 in the front and 235 rear also would need some camber arms. Front fenders would need to roll and a slight pull in rear......

Paul@howeyindustries.com

Check out the fitment Velgen Just did.
19x9 et 35 235-35-19 and 19x10.5 et 45 265-30-19
No fender mods / No rubbing

07awdis250

iTrader: (1)

Wow !! beautiful car . I like the fitment on those wheels and they also look extremely good . What are you lowered on?

aTeAse

BC coils are out for is300h, Is suspension same as 350? 250?

I assume only the AWD is different.