DIY: Rear Tail Lamp Removal
#7
Lexus Test Driver
Thread Starter
Having some body work done and discussed having rear lamp tinting ‘included’.
Shop said they're not able to include if they have to remove the lamps, but that they can include if the lamps are left on and masked. I agreed.
Shop called to say they’re almost done, but not able to easily do lamps on the car and that even if they were to remove them, the bumper would have to be removed to remove the lower reflectors.
Anyone have any idea if it’s true the rear bumper has to be removed to remove the reflectors!?
Thanks.
Shop said they're not able to include if they have to remove the lamps, but that they can include if the lamps are left on and masked. I agreed.
Shop called to say they’re almost done, but not able to easily do lamps on the car and that even if they were to remove them, the bumper would have to be removed to remove the lower reflectors.
Anyone have any idea if it’s true the rear bumper has to be removed to remove the reflectors!?
Thanks.
Last edited by dbs600; 02-05-14 at 10:05 AM.
Trending Topics
#8
It's in your manual!
Cliff notes:
Remove the 2 circular covers
Remove with a 8 or 10 socket
Press down against the side of tail light against the car gently and pull at the same time
I just used the plastic pry tools and gently pryed against the rear of the car and it came out.
Cliff notes:
Remove the 2 circular covers
Remove with a 8 or 10 socket
Press down against the side of tail light against the car gently and pull at the same time
I just used the plastic pry tools and gently pryed against the rear of the car and it came out.
#9
Lexus Test Driver
Thread Starter
It's in your manual!
Cliff notes:
Remove the 2 circular covers
Remove with a 8 or 10 socket
Press down against the side of tail light against the car gently and pull at the same time
I just used the plastic pry tools and gently pryed against the rear of the car and it came out.
Cliff notes:
Remove the 2 circular covers
Remove with a 8 or 10 socket
Press down against the side of tail light against the car gently and pull at the same time
I just used the plastic pry tools and gently pryed against the rear of the car and it came out.
Thread
Thread Starter
Forum
Replies
Last Post
Neofate
LS - 1st and 2nd Gen (1990-2000)
28
04-09-14 11:59 AM