Deep review on ebay Headlight - New Version
#106
Lexus Test Driver
Can you post a picture of just general light output with them on the car alone I need new headlights anyway and was considering the aftermarket. but always afraid with the aftermarket projectors even if they are for halogen bulbs
#107
Driver School Candidate
Join Date: Oct 2014
Location: Arizona
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
VIPMOTOZ from EBay $369.
06 10 Lexus IS250 is350 Smoke DRL Light Bar Projector Headlights Left Right Pair | eBay
06 10 Lexus IS250 is350 Smoke DRL Light Bar Projector Headlights Left Right Pair | eBay
#109
Driver School Candidate
Join Date: May 2014
Location: Iowa
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
I notice the price had jump on the headlights, I got lucky and bought them when the price was still low at $388
#111
I will update later today!!!
For those of you already buy but not install it yet. Hold on little bit if you don't want to take it out to correct the error
#113
Seen that price no way. Give it some time ebay sellers get greedy when they get a sales surge, but it never lasts another sell will appear and trump that ridiculous price.
#115
Lexus Test Driver
#116
Driver School Candidate
Join Date: May 2011
Location: CA
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Mine just arrived in the mail today via UPS. Very nicely packed and looks clean. Will wait for instructions on how to correct the light issue in the pics above.
#118
Here is update of it. I will edit the first posted when I got time.
To correct the death black spot. You need to remove little racket attached to cut off (not sure what is that for)
To remove it, simply using Phillip screw driver to unscrew it. If it keep rotate, use something to push the metal forward you will get the screw off. Don't worry about that metal thing fall of inside the headlight. It will get into the headlight housing and you could get it out by upside down the whole headlight.
Here is some picture of it.
That is the screw i was talking about
Look closer, you will see there is little metal tab placed right in front of cut off light (which is need to be removed)
Another closer look (metal tab clearly placed higher than cutoff shield which is creating black spot on the output and the screw I was talking about)
Another zooming look
Here is what it's look like after removed.
The black spot you see is the top (look like U shape)
Picture of using Phillip screw driver to remove it
Another shoot of it
To correct the death black spot. You need to remove little racket attached to cut off (not sure what is that for)
To remove it, simply using Phillip screw driver to unscrew it. If it keep rotate, use something to push the metal forward you will get the screw off. Don't worry about that metal thing fall of inside the headlight. It will get into the headlight housing and you could get it out by upside down the whole headlight.
Here is some picture of it.
That is the screw i was talking about
Look closer, you will see there is little metal tab placed right in front of cut off light (which is need to be removed)
Another closer look (metal tab clearly placed higher than cutoff shield which is creating black spot on the output and the screw I was talking about)
Another zooming look
Here is what it's look like after removed.
The black spot you see is the top (look like U shape)
Picture of using Phillip screw driver to remove it
Another shoot of it
Last edited by whitebeast; 06-08-15 at 11:49 PM.
#119
For those of you (in OC area), if you need help with further info or installing it, PM me so I could help you out.
If you have any other question or something about this headlight, PM me directly so I could take a look into your problem and help you out.
LIKE I STATED EARLIER, I RARELY USING MY LOW BEAM SO THAT IS THE REASON WHY I DIDNT NOTICE THE BACK SPOT AFTER LITTLE WHILE I HAVE MY HEADLIGHT INSTALLED.
If you have any other question or something about this headlight, PM me directly so I could take a look into your problem and help you out.
LIKE I STATED EARLIER, I RARELY USING MY LOW BEAM SO THAT IS THE REASON WHY I DIDNT NOTICE THE BACK SPOT AFTER LITTLE WHILE I HAVE MY HEADLIGHT INSTALLED.
#120
Here is picture of the light output after the metal tab has been removed
There is no more black spot. I'm really sure you did notice about there light dots above the cut off.
The dots is the opening on the cutoff shield to mounted metal tab has been removed.
It's no harm at all!!!
There is no more black spot. I'm really sure you did notice about there light dots above the cut off.
The dots is the opening on the cutoff shield to mounted metal tab has been removed.
It's no harm at all!!!