Aftermarket LED Projector headlight adjustment *help
#1
Driver School Candidate
Thread Starter
Aftermarket LED Projector headlight adjustment *help
Hi all! I'm sorry if this has been posted before but I couldn't find anything really. Does anyone have these projectors and would you know how to adjust the verticle setting on it? It currently points too high. I bought the car with them already installed. I found the screw where to adjust the horizontal setting (screw on top right).
Here are some pictures:
https://docs.google.com/file/d/0B5Sw...p=docslist_api
https://docs.google.com/file/d/0B5Sw...p=docslist_api
Any help is appreciated. And sorry for advance if this post is not posted correctly or not in the right area of the forum.
Here are some pictures:
https://docs.google.com/file/d/0B5Sw...p=docslist_api
https://docs.google.com/file/d/0B5Sw...p=docslist_api
Any help is appreciated. And sorry for advance if this post is not posted correctly or not in the right area of the forum.
#2
Instructor
iTrader: (11)
These are the first version of the replicas! Looks like someone already adjusted the driver side. I'd recommend turning the lights on while on a flat road, facing a wall, and then adjust the screw with teeth marks as you started.
For some reason I thought there's supposed to be 2 screws, one for left and right and the other for up and down.
Let me know how it goes, or someone else can come chime in!
For some reason I thought there's supposed to be 2 screws, one for left and right and the other for up and down.
Let me know how it goes, or someone else can come chime in!
#3
Driver School Candidate
Thread Starter
Do you have the same projectors? I thought there would be two screws one for up/down and one for side to side but all I found was that one screw that makes it go side to side. The one on top right.
Thread
Thread Starter
Forum
Replies
Last Post
lexusAU
IS - 2nd Gen (2006-2013)
3
03-07-13 04:44 AM