2006 is250 RWD question
#1
2006 is250 RWD question
I recently purchased a 2006 is250 RWD. A month ago i started to hear a bad noise from the front suspension when i go over bumps at slow speed. i had it looked over and someone told me is the rubber boot ( https://www.autodoc.co.uk/car-parts/oem/4868053031 ) so i ordered this part. I am wondering if i need to replace the strut mount with the bearing too, it doesn't seem to be included in the one i have ordered. The problem i have is really difficult to find for this model. Are there any other top mount struts that fits to this model of the car? Or anyone knows the OEM for the strut mount.
Sorry if i posted in the wrong section is my first post.
thanks in advance
Sorry if i posted in the wrong section is my first post.
thanks in advance
#2
Instructor
iTrader: (1)
You're going to have to take it apart so you might as well replace the top hat bearing at the same time.
For OEM parts, I use Bell Lexus
https://parts.belllexusnorthscottsdale.com/
Looks like you're in the UK though.
For OEM parts, I use Bell Lexus
https://parts.belllexusnorthscottsdale.com/
Looks like you're in the UK though.
#3
You're going to have to take it apart so you might as well replace the top hat bearing at the same time.
For OEM parts, I use Bell Lexus
https://parts.belllexusnorthscottsdale.com/
Looks like you're in the UK though.
For OEM parts, I use Bell Lexus
https://parts.belllexusnorthscottsdale.com/
Looks like you're in the UK though.
Thread
Thread Starter
Forum
Replies
Last Post
tbarrios
IS - 2nd Gen (2006-2013)
0
10-26-18 12:47 AM
fatjoez
IS - 2nd Gen (2006-2013)
1
12-22-15 05:10 AM