Installing drip molding Help
#1
Driver School Candidate
Thread Starter
Installing drip molding Help
Guys,
So before i go outside in this frigid weather is there anything i have to keep in mind when installing the drip molding. i've never done it before and really don't know how it clips on.
I've attached pics to see if you guys can confirm if i have the clips oriented correctly.
So before i go outside in this frigid weather is there anything i have to keep in mind when installing the drip molding. i've never done it before and really don't know how it clips on.
I've attached pics to see if you guys can confirm if i have the clips oriented correctly.
#4
Driver School Candidate
Thread Starter
I'm not sure if this helps anyone but i ended up using West System 650K G/Flex Epoxy Kit. I mixed 60% Resin to 40% Hardener for added flexibility.
The initial results are great. Time will tell how it will hold up.
The initial results are great. Time will tell how it will hold up.
Thread
Thread Starter
Forum
Replies
Last Post
jbarra
Performance & Maintenance
4
06-29-15 07:16 PM