LEDs inside flicker when dimming on and off?
01-22-15, 04:05 PM
#1
Pole Position
Thread Starter
LEDs inside flicker when dimming on and off?
I just replaced my dome lights in front and back of cabin with Blue LEDs. They all sort of flicker a bit when they dim on and off. Is this normal?
01-23-15, 10:22 AM
#3
Rookie
Join Date: Jul 2014
Location: Barrie, Canada
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Yes. Dimming is mimicked by turning the bulb on and off repeatedly. This works for a halogen bulb as it takes awhile for the bulb to charge up. This is almost instant for led which is why you actually see each on/off sequence.
01-23-15, 12:34 PM
#5
Standard filament style bulbs vary the light output based on the voltage being applied to them.
LEDs on the other hand require a certain voltage before they turn on and operate properly. Without sufficient voltage they tend to flicker.
In order to create a nice dimming effect your car will increase the voltage up to 12V over a few seconds. This works for the incandescent bulbs but not the LEDs.
LEDs on the other hand require a certain voltage before they turn on and operate properly. Without sufficient voltage they tend to flicker.
In order to create a nice dimming effect your car will increase the voltage up to 12V over a few seconds. This works for the incandescent bulbs but not the LEDs.
Thread
Thread Starter
Forum
Replies
Last Post
satz
RX - 2nd Gen (2004-2009)
12
12-24-12 06:08 AM